Sold 48" Double End Milling Bar With 3 Chains for Alpina Saws

[Sawsrusinc]

48 inch double end milling bar and 3 chains. The total length of the bar is 56 inches and was being used with 2 Alpina Forest 120 saws. The bar stud groves are right at 3/8" so I am sure it could be used or modified to use with different makes or models. The bar is nice condition on one side the other side has some pitting and could probably be resurfaced. The bar itself is straight no warping and the rails are in nice condition. It will come with three chains. The chains have not been used in over ten years and have some stiff spots but should loosen up with a good soaking or some cleaning.. I would do 200 shipped to anywhere in the lower states for the setup. Please PM me if interested, Thank you

 

[Modifiedmark]

What gauge is the bar and what pitch are the chains? Please and thank you.

 

[Sawsrusinc]

The gauge is 063 and the chains are 404 pitch