Sold 50cc madness

[cuinrearview]

I realized I have far too many 50s right now. A couple of these I had planned on keeping around and playing with but the builder pile is growing and I've made a deal on a small cabin and land up north so the cash could come in handy. I will blow these off before shipping but I've been using them. I'll try and keep my descriptions a little more brief than usual. Feel free to ask questions. All prices are PHO, buyer pays shipping. I have some bars and chains that could be added for a small cost. Just let me know what you're looking for. The Sugi on the weed whip saw is NFS.

Husqvarna 350. OEM cylinder with the intake and exhaust widened. Lowers and bearing cup smoothed. .010 off of the top of the bearing cup surface. No base gasket. 185psi with a Hyway popup piston. Aftermarket muffler opened up. $185

 

[cuinrearview]

SOLD2152 with a Hyway quad port cylinder and flat top piston. No base gasket. Little hole in front of muffler and missing one top cover clip. Some orange overspray on top. Runs good. $250

 

[cuinrearview]

The weed whip 346xp. I split the cases and added crank stuffers from a 545fx weedeater. New Nachi bearings, OEM seals, meteor piston and Caber ring. Carb re-built with Walbro kit. Cleaned up OEM NE cylinder. It's ugly(on purpose) but mechanically pretty much new. $300

 

[cuinrearview]

SOLDDolmar 5105 easy start. 5100s muffler. Runs great but it has a weird vibration that I haven't been able to track down. If I find anything I'll update. All OEM. $225

 

[cuinrearview]

2152/3. Runs really well. Base gasket delete, timing advance, and muffler mod. New fuel line, meteor piston, carb kit. NE jug has most of the top fin missing and the second one welded. Very easy starting with the primer bulb. I plugged the decomp. I just finished building this, tuned and made a couple cuts last night. I have more pics of the build if anyone is interested. $350

 

[Johnmn]

Why tempt me with the red and black ones?!?!?!

 

[cuinrearview]

Why tempt me with the red and black ones?!?!?!

The last one is a real nice runner. I didn't touch the ports either.

 

[Trent Curtis]

Interesting build on the 346, Tim!

We would love to see a vid of your weed whip in action!

Bump for a Great seller

 

[cuinrearview]

Interesting build on the 346, Tim!

We would love to see a vid of your weed whip in action!

Bump for a Great seller

I did a build thread with vid over on the other site. It needs a sharp self feeding chain and a light hand to really shine. If I was more knowledgable on porting theory I think there's a way to make the stuffers work but a 346 is set up pretty well from the factory.

 

[cuinrearview]

Here ya go Trent. This was right after I finished it. I've since used a better chain and gotten a little more used to how it makes it's power.

 

[cuinrearview]

This is the 350 right after I finished it with a real aggressive chain.

 

[brad ruch]

The weed whip 346xp. I split the cases and added crank stuffers from a 545fx weedeater. New bearings, seals, meteor piston. Carb re-built. Cleaned up NE cylinder. It's ugly(on purpose) but mechanically pretty much new. $300
View attachment 762045 View attachment 762046 View attachment 762047 View attachment 762048 View attachment 762049

I ran this recently [emoji16] I was very impressed.great running saw.

Sent from my Pixel 2 XL using Tapatalk

 

[Armbru84]

I ran this recently [emoji16] I was very impressed.great running saw.

Sent from my Pixel 2 XL using Tapatalk

Same here. Saw runs good!

GLWS Tim!!

 

[nighthunter]

2152 with a Hyway quad port cylinder and flat top piston. No base gasket. Little hole in front of muffler and missing one top cover clip. Some orange overspray on top. Runs good. $250
View attachment 762040 View attachment 762041 View attachment 762042 View attachment 762043 View attachment 762044

do the sandals come as a pair?, GLWS and Tim

 

[cuinrearview]

do the sandals come as a pair?, GLWS and Tim

I can get you a pair Oisin. $15 at Costco. Shipping might kill the deal though...

 

[Hinerman]

The last one is a real nice runner. I didn't touch the ports either.

Which J-red is the 346 equivalent?

 

[cuinrearview]

Which J-red is the 346 equivalent?

The last one is a red 346 NE

 

[cuinrearview]

Real nice weather moving in. If I hadn't been working all weekend I'd have been in the woods cutting. I would consider a clapped out 395xp to build in trade. So far only tire kickers on these.

 

[VA 372xp]

Here ya go Trent. This was right after I finished it. I've since used a better chain and gotten a little more used to how it makes it's power.

Saw runs 2 good a out box chain will make plenty of money with this saw

 

[cuinrearview]

Motivated to sell, listening to offers