562XP Flop

[Douglas Firbanks]

Attached a video showing the issue. Any idea what part(s) needs replacement? Got the saw used so part(s) could be missing.
View attachment IMG_4287.mov

 

[Old2stroke]

Attached a video showing the issue. Any idea what part(s) needs replacement? Got the saw used so part(s) could be missing.
View attachment 1249245

You need a parts diagram. At least a couple of anti vibe mounts are broken

 

[atpchas]

 

[Douglas Firbanks]

Thank you sir looks like number 4 on that IPS is the missing component!

 

[atpchas]

That saw is so floppy - Olds2stroke is correct to recommend examining the entire AV system. I don't think the missing component (#4 above) explains all the motion.

 

[sean donato]

Above post is correct, there's more to that story then one missing av mount. Check the upper starter side iso mount. If it was dropped/ran over and broke the case, you'll be looking at a short block assembly.

 

[MacAttack]

Look at the chain brake...that poor saw got dropped or had something dropped on it pretty bad..take it apart to see what's busted.

 

[Douglas Firbanks]

Above post is correct, there's more to that story then one missing av mount. Check the upper starter side iso mount. If it was dropped/ran over and broke the case, you'll be looking at a short block assembly.

When you say short block assembly are you referring to the crankcase assembly? Part No. 575380218

 

[Douglas Firbanks]

Look at the chain brake...that poor saw got dropped or had something dropped on it pretty bad..take it apart to see what's busted.

100% the top of the cylinders heat fins were bent pretty bad alongside a cracked spark plug... I got it for $40 so there is that haha