husqvarna257
ArboristSite Guru
Hey guys
I have a central boiler 1450 that is tied into a heat exchanger in the house that goes to my indoor boiler. The problem is that if the zones in the house are cool the boiler kicks on even though the outdoor furnace is running at 190*. So I put a Honeywell 1018 606C on the line coming in from the furnace. I wired it to the R and B set it at around 160* and then wired it directly to my boilers aquastat. I thought this would bypass the indoor boilers aquastat but it did not. Iv'e looked around but I can't find out how to wire this.
I have a central boiler 1450 that is tied into a heat exchanger in the house that goes to my indoor boiler. The problem is that if the zones in the house are cool the boiler kicks on even though the outdoor furnace is running at 190*. So I put a Honeywell 1018 606C on the line coming in from the furnace. I wired it to the R and B set it at around 160* and then wired it directly to my boilers aquastat. I thought this would bypass the indoor boilers aquastat but it did not. Iv'e looked around but I can't find out how to wire this.
