Bar & chain oil: Stihl vs Poulan

[Chainsaw Pete]

I recently read here that a number of guys advocated using the cheapest bar and chain oil they can find. To date, I've only used Stihl oil (orange container, not that super dooper organic synthetic slimy Platinum Chain Lubricant (they don't even call it oil)). After reading what others said, I figured that too cheap means it's probably recycled bear saliva so I amended their suggestion to 'look for the cheapest name brand B&C oil you can find'.

Stihl oil from my local dealer sells for around $25/gallon - I've not priced it recently but I remember feeling I paid too much last time. I've seen it online for as little as $12/gallon+ 12.50 shipping. I checked my usual big box stores and Menards was selling Poulon Pro (Professional Grade) B&C Oil for $10/gallon, or under 10 with the rebate + sales tax. Poulon is a recognizable name so I bought it.

The Stihl at room temp (today it was 77ºF) is thick and sticky. The Poulon was quite thin, flowed much better, and did not seem anywhere near as sticky. It was also purple.

Am I over thinking this? Should I just use the Poulon and not look back? I can live with the purple color.

BTW, today I took an empty gear oil container - 1 quart round bottle w/ a pointy top (like a tube of construction adhesive) and a cap. I filled it with the Poulon oil. Voila, easy peasy to fill the chainsaw w/ oil now, (after over filling it twice w/ the Stihl oil left in the gallon container).

 

[bwalker]

Yes you are over thinking. Run the cheap bar oil and stop worrying.

 

[Chainsaw Pete]

Yes you are over thinking. Run the cheap bar oil and stop worrying.

I did today, and cut up two trees into 16" hunks. Saw no difference in performance, but wondered if this is the kind of wear and tear that shows up in a shorter lived bar and chain.

 

[Mad Professor]

I did today, and cut up two trees into 16" hunks. Saw no difference in performance, but wondered if this is the kind of wear and tear that shows up in a shorter lived bar and chain.

I like poulan better than Stihl oil.

 

[moxiemaul]

Been trying the DGP bio oil vs whatever the stuff is Home Depot sells... honestly can't tell the difference. Maybe the DGP pumps more because its thinner, which would be nice given the longer bar...

 

[Mad Professor]

Been trying the DGP bio oil vs whatever the stuff is Home Depot sells... honestly can't tell the difference. Maybe the DGP pumps more because its thinner, which would be nice given the longer bar...

The bio-oils can make a mess of saws as they will polymerize. I used to use it when chainsaw milling so I could use the sawdust for mulch.

I checked HD here, cheapest oil is $15/gal

 

[sean donato]

Over thinking it. Been running g the cheapest oil I can get for years and years now. Never noticed any more or less bar wear from it. Some oils are thicker and better for summer use, but I haven't seen any real issue running the thinner oils. Once the saws hot the thicker stuff thins way out anyway.

 

[MacAttack]

I have a couple cases of old 10w-30 that I'm planning to use as bar oil because there's virtually no cars made that even use that weight oil anymore. About the only use I can think of for the stuff.

 

[Chainsaw Pete]

I have a couple cases of old 10w-30....

Good point. I have about 5 quarts of non detergent 30 wt motor oil that I bought in the early 70's. Non detergent oil has better lubricating properties than detergent oils (the latter are better for cars because they don't leave deposits). Can I use this oil as B&C oil?

 

[MacAttack]

Good point. I have about 5 quarts of non detergent 30 wt motor oil that I bought in the early 70's. Non detergent oil has better lubricating properties than detergent oils (the latter are better for cars because they don't leave deposits). Can I use this oil as B&C oil?

I have owners manuals for some old saws that say to use 30 weight oil for bar oil. It will fling off the chain more but sure why not?

 

[Chainsaw Pete]

I have owners manuals for some old saws that say to use 30 weight oil for bar oil. It will fling off the chain more but sure why not?

Lol, you could consider changing the motto under your avatar to 'I love the smell of 2-stroke in the morning.' (Shades of Robert Duvall).

 

[Marley5]

Whatever saw shop I'm in I just grab some.

 

[MacAttack]

Lol, you could consider changing the motto under your avatar to 'I love the smell of 2-stroke in the morning.' (Shades of Robert Duvall).

Smells like.... victory.

 

[bwalker]

I did today, and cut up two trees into 16" hunks. Saw no difference in performance, but wondered if this is the kind of wear and tear that shows up in a shorter lived bar and chain.

You will notice no differance.