Bar size

[Doug01]

I was wanting to know if there is some way to tell if a bar is for the large mount or the smaller mount Huskies by the the part number. I'm wanting to get a couple bars for my 372 and seen some good deals on e-bay but don't know what mount they are for. Of all the sellers I asked, they don't know........just got the numbers on the bar and that's all they know. Thanks for any help.

Doug

 

[glens]

Doug, fetch <a href="http://www.windsorforestry.com/guides/pdf/ChainsawBarMountCodes.pdf">ChainsawBarMountCodes.pdf</a> from Windsor's site.&nbsp; I think they share the codes with Oregon.&nbsp; "The last four digits identify the motor mount pattern."

Glen

 

[Ryan Willock]

Or you could just buy from CCD and tell them that you want a couple of bars for your 372 as bars and chains are generally cheaper there than anywhere else.

 

[Doug01]

Ryan, that's where I'll probably get them if I don't find any in my other searches. Deals can be made on e-bay but you got to really factor the shipping. CCD is good to deal with. Got a saw from them for me and one for my brother.

Does anyone know how Husy part numbers match up with the mount?

Thanks,
Doug

 

[woodsjunkie]

I would recomend checking with Jeff sikkema he is the bar man.

http://www.snssawshop.com/

 

[ray benson]

Hi Doug,
Southwest Supply has some pretty good info.
http://www.southwestfastener.com/productshusqsbarchain.htm#guidebars
About halfway down the page starts the bar info.

Ray

 

[Stumper]

Large Huskies take D009 bars. The small ones usually need k095. SLH 95 patterns (Echo , Poulan, Tanaka)are fatter in the tailstock and have different oil holes but they will fit the bar studs on the small saws and usually oil through the upper adjuster slot.

 

[Bill G]

Doug,

If I understand you correctly you are wanting to know if the massive amounts of bars that show up on ebay will fit your saw. If you email me a part number I can probably tell you yes or no.

Bill

 

[Doug01]

Thanks Bill!