Carb kit by part #???

[Deebo]

New to woodcutting for heat and was given an older McCulloch saw that didn't run. Took it to the local hardware/Stihl dealer for repair and they have had it for 7weeks. Finally got out of them that a carb kit was on back order this whole time. I got the part number for it and was wondering if anyone here can help me locate such a kit. The number is K10-HDB/49-832. Had it for such a short amont of time before I dropped it off I am not sure of model or age. Thanks in advance. Oh, and very nice informative site!

 

[sugarbush]

that kit is for a pro mac 605, 610 or 650 series. I might have a nos mac kit, I can look mon, but your shop should be able to get in a lot less then 7 weeks. maybe just forgot to order it. try calling a couple of other shops and see if they can get the parts and how soon.

 

[Deebo]

Yeah, I keep checking back and he says he is at their mercy. Thank you for the info. If you do find one monday, please let me know. Since this saw has been in the shop so long I snatched up a Husky 359, but I would like to get the Mac going as well.

 

[John Ellison]

I f Baileys dont have it (link at top of page) try mfgsupply.com

 

[Dok]

Is this what you are looking for? There are lots of Walbro carb kits on eBay, search for K10-HDB.

http://cgi.ebay.com/Walbro-HDB-Carburetor-Kit-8342-K10-HDB-Cheap_W0QQitemZ130072057542QQihZ003QQcategoryZ85915QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

 

[Deebo]

Is this what you are looking for? There are lots of Walbro carb kits on eBay, search for K10-HDB.

http://cgi.ebay.com/Walbro-HDB-Carburetor-Kit-8342-K10-HDB-Cheap_W0QQitemZ130072057542QQihZ003QQcategoryZ85915QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

I am not sure if that is the kit or not. I am going by the part number the repair shop gave me. Does this kit fit all k10-HDB carbs? Is the 49-832 insignificant? Thanks for all the replys!

 

[gtor72]

try this site also

www.hyperparts.com
i have had good luck using them, click on the 2-cycle carb link.
they have very good customer service also...

 

[Deebo]

I am not sure if that is the kit or not. I am going by the part number the repair shop gave me. Does this kit fit all k10-HDB carbs? Is the 49-832 insignificant? Thanks for all the replys!

Anyone?

 

[sugarbush]

Anyone?

that's the one your shop can't get.

 

[Deebo]

Thanks for your help and patience fellas ! Hopefully have that old Mac running soon...:greenchainsaw: