Central Va. GTG 2013

[Guido Salvage]

Got the oil changed in my Pathfinder and am starting to break down saws to take. I have the bars off a 365 Special, 200T, Makita 510 and my Shiny 757. Back to work to get more stuffed in the tubs.

I also have the advantage of having 175+ saws stored 10 minutes away so I can always grab something while the GTG is in process.

 

[Jimmy in NC]

I've got a Fiskars hand saw that I know will start......:hmm3grin2orange:

 

[Mastermind]

I've got a Fiskars hand saw that I know will start......:hmm3grin2orange:

And stuff. :msp_sneaky:

I'm getting excited.......first GTG of the season.

Young is out so now it's just Jon, David, and me.

 

[Mastermind]

I've got at least one saw for the pile ......


I'm bringing a 650 Super to embarrass 750s. :msp_tongue:

And a ported 562XP......

A ported MS441C

Two ported 372XPs.

A ported 576XP if I get it done in time.

A ported 084 and a 088.

Maybe more......

Oh.......an Echo Twin that's ported......

 

[Roanoker494]

Any AH-47 intakes that have an impulse hole for a Tilly HL? My U4g has the goofy power products carb, and the intake has no impulse hole

I don't remember any of them having a HL installed, though there are several in the shed that I have not looked at too hard.

Dean's DO-100 is being a PITA and don't want to go yet. I broke the fuel line coming out of the pump so it is not getting enough fuel pressure to open the fuel shut off in the meter...... Stopped by ACE Hardware today and found some small threaded barbs and plan to change it over to standard fuel line tomorrow.

 

[Jimmy in NC]

I don't remember any of them having a HL installed, though there are several in the shed that I have not looked at too hard.

Dean's DO-100 is being a PITA and don't want to go yet. I broke the fuel line coming out of the pump so it is not getting enough fuel pressure to open the fuel shut off in the meter...... Stopped by ACE Hardware today and found some small threaded barbs and plan to change it over to standard fuel line tomorrow.

Once you get one done don't you want to do another one? I have one that wants to come visit.

 

[Guido Salvage]

And stuff. :msp_sneaky:

I'm getting excited.......first GTG of the season.

Young is out so now it's just Jon, David, and me.

More room for saws (or pies).

 

[igpoe]

I don't remember any of them having a HL installed, though there are several in the shed that I have not looked at too hard.

Dean's DO-100 is being a PITA and don't want to go yet. I broke the fuel line coming out of the pump so it is not getting enough fuel pressure to open the fuel shut off in the meter...... Stopped by ACE Hardware today and found some small threaded barbs and plan to change it over to standard fuel line tomorrow.

Seems to me all a fella needs to have an impulse hole is a sharp drill in the right spot with a 1/8" drill bit.

Roanoker is beginning to understand why he has been working on this saw instead of yours truly!
Igpoe

 

[Jimmy in NC]

More room for pies.

There... it's fixed. You had a few too many words in there..

 

[Jimmy in NC]

Seems to me all a fella needs to have an impulse hole is a sharp drill in the right spot with a 1/8" drill bit.

Roanoker is beginning to understand why he has been working on this saw instead of yours truly!
Igpoe

Yeah... Roanoker is learning, I'm learning.. we all are learning.

Make sure the DO-100 makes the trip even if it doesn't run.. I'd really like to look it over and see what a complete running one looks like in person so I have something to aspire towards...

 

[showrguy]

I've got at least one saw for the pile ......


I'm bringing a 650 Super to embarrass 750s. :msp_tongue:

And a ported 562XP......

A ported MS441C

Two ported 372XPs.

A ported 576XP if I get it done in time.

A ported 084 and a 088.

Maybe more......

so i should just leave my 880 at home ?? i don't really have any short bars and big sprockets for it..
don't forget, you have a sticker to install !!

 

[Jimmy in NC]

so i should just leave my 880 at home ?? i don't really have any short bars and big sprockets for it..
don't forget, you have a sticker to install !!

He's got lots of stickers to install.. we best get him early in the day before he gets all jacked up eating pie....

 

[Mastermind]

He's got lots of stickers to install.. we best get him early in the day before he gets all jacked up eating pie....

Pie??????? :msp_razz:

 

[Jimmy in NC]

Pie??????? :msp_razz:

Ohh heck.. he's already winding up...

So will you eat pie if it's not warm? Would you like it warmed on the intake for 20 minutes?

 

[watsonr]

Worth a 1000 word's....

I'm ready!

 

[Jimmy in NC]

Worth a 1000 word's...

Pie??????? :msp_razz:

There's 2000 words!

Can we race with the chains on backwards? Or the no bar oil class? How about the rocked out chain, hand file, then cut through the log for 3 cuts event?! :msp_tongue:

 

[watsonr]

There's 2000 words!

Can we race with the chains on backwards? Or the no bar oil class? How about the rocked out chain, hand file, then cut through the log for 3 cuts event?! :msp_tongue:

Start with a rocked chain, you get 5 minutes to do anything with a file you want and get your cuts done, PERIOD! Fastest 3 cuts wins? Who gets to rock the chain:msp_w00t: That's what I'm taking about! Watch your saw go into the dirt with sparks flying.... who's first?

 

[Mastermind]

I'll see your 1000 words and raise ya a 1000. :msp_wink:

[video=youtube;g_yMZ9GuH0U]http://www.youtube.com/watch?v=g_yMZ9GuH0U&feature=youtu.be[/video]

 

[igpoe]

I don't have any hip boots, but I do have some chest waders.

 

[Pioneer fan]

I must have angered the two-man saw gods:msp_scared:......the mall 11 is back on the "does not run" list. Well, it does run, it fires up almost instantly....chugs, snorts, and dies after about 30-45 seconds.....and will refire with one pull....only to repeat the process. I am kinda lost as to what is going on, and have had the carb apart, more times than i care to count.