hottubbrad
New Member
I have a Stihl with a 20" bar. About 1 year old.
I have just installed a new chain and used it for about 2 hours.
Now I have sharpened the new chain once. 3-4 passes with a manual 3/16" file on each tooth.
I also used a flat file to lower the depth gauges (name?)...again 3 light passes with a flat file....just to make the chain bite more
Now the saw pulls to the right as I cut and it seems to cut very slowly. You can't rock the saw in the cut because the cut is now curved to the right.
What the *&$@ am I doing wrong??
I have just installed a new chain and used it for about 2 hours.
Now I have sharpened the new chain once. 3-4 passes with a manual 3/16" file on each tooth.
I also used a flat file to lower the depth gauges (name?)...again 3 light passes with a flat file....just to make the chain bite more
Now the saw pulls to the right as I cut and it seems to cut very slowly. You can't rock the saw in the cut because the cut is now curved to the right.
What the *&$@ am I doing wrong??