Chainsaw photography

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Well, It's been more than a year since I started this thread. Finally made a decision....purchased the Nikon D3000 today. Since the 3100 came out I was looking to get one of them due to the video capability but after finding out it limits the video length....I went with its predecessor for the hundred twenty five savings. First couple pics...and ya not the best yet but learning.


attachment.php

You'll get used to it and love what it'll do. Good lenses make all the difference. Older Nikon lenses will work with it - by and large - you just have to use A (aperture priority) or S (shutter priority) and focus manually. On some you have to remove the meter registration dodad. Enjoy it!
 
You'll get used to it and love what it'll do. Good lenses make all the difference. Older Nikon lenses will work with it - by and large - you just have to use A (aperture priority) or S (shutter priority) and focus manually. On some you have to remove the meter registration dodad. Enjoy it!

Thanks, I will be on the look out at the pawn shops for lenses. Its seems I read somewhere another brand fit as well??? Have done so much reading I'm starting to get them confused LOL.
 
Great thread, great pictures

Great saws, great pictures, great places.

I use a pocket sized Panasonic Lumix DMC-TZ5 to document my small adventures. No question this and most cameras perform in the sun light.


Partner, measuring off this oak log:
jere39-albums802-177887.jpg


Me and my partner rearranging some dead poplar we took down before it came down where it wanted:
jere39-albums802-177889.jpg


Little help moving this one out of sight from the dining room
jere39-albums802-177888.jpg
 
Last edited:
A close up of a square grind.

177358d1301121534-sq-grind-sm-jpg-jpg

Here is a close-up of the chain that came from the PNW with my Contra S. I believe it is square ground but looks considerably differnt from yours. It has obviously been ground more that once but I don't see how it was ground at that angle without cutting into the links.

Taken with my Nikon D90 and 18-55mm zoom lens. [I don't have my 55mm macro here].


attachment.php
 
177921d1301432372-sq-grind-2-jpg-jpg



This is the other side, I didn't post it earlier because I wasn't happy with the focus. I was playing around with the BIL's silvey, playing with angles.
 
Nice sunny day so I played around with it a bit. Getting the hang a little then I will play with the settings.

attachment.php


attachment.php


attachment.php


attachment.php
 
Ah ha - you going to switch over to square grind?
Why of coarse. All of my longer bars that have Sq. chisle cutters get the Square grind. That pic was taken a year or so ago. I Hope my tecnique has improved a little. I can see a little "beak" in the pic. Have fun with that Contra!
 
I haven't actually taken any pictures involving chainsaws, but perhaps one of these days I will. I do enjoy photography, however, so I'll post just a couple pics. The second picture is at least close to the topic :laugh:

29978_460240834571_785774571_6055471_3579180_n.jpg


29978_460240849571_785774571_6055474_6649750_n.jpg
 
Loaded up some of my favorites to do a quick removal this morning.

attachment.php


attachment.php
 
Took 5 minutes today to snap a few pics. Hard enough to take 5 minutes as it was, too busy working on a 395xp. More than surprised to see a saw of this size in this area, that's for sure.

Anyway here we go:

5592935421_9b748c038a_z.jpg


5592946213_332407565a_z.jpg


5593546946_2513dcbce5_z.jpg


5592965353_5e51c5d4a9_z.jpg
 
Back
Top