Clutch drum

[Mr_Brushcutter]

Hi

I'm fairly new to the whole chainsaw matiance thing. I've got a Husky 365 and i've used it a fair amount so i thought i'd grease the needle baearing in the clutch drum.

So i took off the retaining pin removed the cover plate over the power mate sproket and took the top of the clutch drum. Gave the needle baring a greasing.

However on puting it all back together it seems a bit harder to pull the chain around by hand, makes a bit of a different noise as well. What could i have done wrong? I had to push the clutch drum down quite hard to get the clip back on could that have damaged it or upset it?

Needle baring wrong way up?

Thanks for any help

Andy

 

[HiOctane]

Are you sure the chain is on the rim,not on the side.Another thing could be the plastic fingers from the oil gear are not aligned in the sprocket slots.