Clutch

[jonsered-52E]

So this is the current clutch I have it take a .325 chain. The chain is so small it dulls quick. A majority of my saws are 3/8 chain so I would like to put a 3/8 clutch on it to make life a bit easier.
Any help is appreciated

 

[NSEric]

What saw is it?
You can get an oregon clutch and rim sprocket for a lot of saws.

 

[Backstage]

What saw is it?
You can get an oregon clutch and rim sprocket for a lot of saws.

Good advice here. Also, that sprocket is heavily worn.

 

[Captain Bruce]

So this is the current clutch I have it take a .325 chain. The chain is so small it dulls quick. A majority of my saws are 3/8 chain so I would like to put a 3/8 clutch on it to make life a bit easier.
Any help is appreciated View attachment 1024735View attachment 1024736View attachment 1024737View attachment 1024738

Jonsered 52E, correct? Thats a standard catalogue spur drum sprocket found anywhere.....whats with the micometer? You have done the homework first, and are at the end of your ope.....hoping to retrofit?

 

[jonsered-52E]

What saw is it?
You can get an oregon clutch and rim sprocket for a lot of saws.

2050, I've been looking but haven't found what I want yet

Jonsered 52E, correct? Thats a standard catalogue spur drum sprocket found anywhere.....whats with the micometer? You have done the homework first, and are at the end of your ***.....hoping to retrofit?

Im looking for a drum like what the 52E's have so I can swap the sprocket to a bigger or smaller. I've done the easy part now it's finding it

 

[jonsered-52E]

This is all I found, I do have the 3/8 sprocket so I can change it myself

https://www.sawagain.com/jonsered-4...owermate-rim-sprocket-325-7-tooth-new-35641x/https://sawzillaparts.com/proline-c...g-husqvarna-40-45-49-jonsered-2041-2045-2050/

 

[ray benson]

2050, I've been looking but haven't found what I want yet


Im looking for a drum like what the 52E's have so I can swap the sprocket to a bigger or smaller. I've done the easy part now it's finding it

First looked on ebay. Probably many places would have it.
https://www.ebay.com/sch/i.html?_fr...570.l1313&_nkw=jonsered+503+15+98-01&_sacat=0

 

[Mad Professor]

See if you can get a rim setup so if you don't like 3/8" on the little saw.