Stihl 064 or 066?

[David Major]

Could you help me identify this saw please?

What do you think is it a Stihl 064 or 066?

Thank you.

 

[RedneckChainsawRepair]

I wish I knew stihl's better by looking like I can with other brands. Looks like red eye rev limited 066 to me.

Reminds me of this red eye 066 arctic I seen local FS.

 

[Bob Hedgecutter]

Could be made up out of the spare parts box.
Looks to be an early 066 red light (064 never had the red light)- but with some later parts added.
Has the wide alloy flywheel- wider recoil starter cover and elastostart rope/handle from much later saws and decomp engine cover from same.
Alloy air box and flat filter of the 064/early 066 type, master control switch being metal shaft with red cast over plastic is period correct- but I am not sure the semi transparent fuel tank is correct for era.
So, depending on how much is true to original and how much has been parts swapped- could be pretty much a mash together of any of the 1122 model saws and parts thereof. Or, it could still be an original 066 red light with a few newer genuine parts to keep it running.

 

[bigbadbob]

Screw size on cylinder base could tell you 64 66 are different
And spacing i think if a bit different,,

 

[L34]

Look at the oil pump.
064 has hose,066 has internal passage.

 

[ZeroJunk]

See if the red light is actually wired.

 

[David Major]

Yes, working red light.

 

[pioneerguy600]

The oil pump tells the difference every time. I cannot fathom how after all the dozens of threads on this site where it has been stated over and over to look at the oil pump to differentiate between the two.

 

[pioneerguy600]

Could be made up out of the spare parts box.
Looks to be an early 066 red light (064 never had the red light)- but with some later parts added.
Has the wide alloy flywheel- wider recoil starter cover and elastostart rope/handle from much later saws and decomp engine cover from same.
Alloy air box and flat filter of the 064/early 066 type, master control switch being metal shaft with red cast over plastic is period correct- but I am not sure the semi transparent fuel tank is correct for era.
So, depending on how much is true to original and how much has been parts swapped- could be pretty much a mash together of any of the 1122 model saws and parts thereof. Or, it could still be an original 066 red light with a few newer genuine parts to keep it running.

Bob, all those exterior body parts are never dependable way to differentiate between the 064 and 066, body parts can be swapped and serial numbers mean squat to anyone not connected to Stihl corporate, waiting to hear back from them is a big waste of time so the simple look at the oil pump is all I have ever needed. If one cannot remove a clutch drum to take a peek, they should not be working on saws.

 

[ZeroJunk]

I love it. Some psychopath goes around the world to make an 064 look like an 066 so weirdos on a forum can have a buyer dismantle it.
Or, it is just an 066.

 

[Bob Hedgecutter]

Bob, all those exterior body parts are never dependable way to differentiate between the 064 and 066, body parts can be swapped and serial numbers mean squat to anyone not connected to Stihl corporate, waiting to hear back from them is a big waste of time so the simple look at the oil pump is all I have ever needed. If one cannot remove a clutch drum to take a peek, they should not be working on saws.

Totally agree- thats why I suggested it could be a mash up from the parts box- all that serial number tells me is it was made in Germany- which stands to reason as the OP is in Europe.

 

[ZeroJunk]

Be interesting to know if it runs well and makes good power. If the red light still works and the flywheel is not original have to wonder what the timing is.

 

[RedneckChainsawRepair]

Be interesting to know if it runs well and makes good power. If the red light still works and the flywheel is not original have to wonder what the timing is.

He said red light working in thread. Just a couple post ago. = Yes, working red light.