Want to Buy cyl assembly mcculloch ,partner

[ralph blume]

for mculloch 1000 same as partner p100

 

[Jay Hansen]

Ralph, do you still need this cylinder? I have a P100 parts saw that I think has a good top end. If you're interested I can inspect it and send pictures.

 

[ralph blume]

Ralph, do you still need this cylinder? I have a P100 parts saw that I think has a good top end. If you're interested I can inspect it and send pictures.

tore this one apart, nothing any good rod broke,belongs to friend will ask, . how much for it
?

 

[Jay Hansen]

Sounds like he might be better off taking the whole case. It turns well. Let's say $100 plus shipping.

 

[Jay Hansen]

OR, depending on what parts of his saw are good, I might be interested in buying it if he decides not to do the repairs.

 

[ralph blume]

OR, depending on what parts of his saw are good, I might be interested in buying it if he decides not to do the repairs.

i think he would rather sell parts engine no good rest should be ok ,will as , wish to make offer/ i will be seeing him next week and maybe get photo

 

[ralph blume]

i think he would rather sell parts engine no good rest should be ok ,will as , wish to make offer/ i will be seeing him next week and maybe get photo

he said 100.00 plus ship. i wil lget photos of what else there is , i think ign, carb clutch, bar chain

 

[Jay Hansen]

Thanks. I'll need to see pics. I also need to know if the brake assembly is present and functional.

 

[ralph blume]

Thanks. I'll need to see pics. I also need to know if the brake assembly is present and functional.

chain brake good, he is getting pics

 

[serdie]

chain brake good, he is getting pics

I’ve got a p100 Partner in good running condition. I bypassed the governor in the carburetor by pulling out the jet and plugging it. Just be careful and don’t wide open throttle with no load. It carries a 32” bar in W.Va. hard wood with ease. Oh this saw never had a chain brake

 

[ralph blume]

Thanks. I'll need to see pics. I also need to know if the brake assembly is present and functional.

got photos. dont see coil, part of chainbrake handle broken off but works saw was running when rod broke, piston cyl no good , case ?, new on here can i give contact info?

 

[Jay Hansen]

PM sent

 

[ralph blume]

PM sent

he will do but shipping is 80.00 fedx

 

[Jay Hansen]

If he packages it and sends me the box weight and measurements, I can email him, or you, a Pirate Ship label. It would have to be sent from a UPS store.
I assume all the linkage and levers for throttle, Choke, and , manual oiler are in the zip lock bag?

 

[ralph blume]

If he packages it and sends me the box weight and measurements, I can email him, or you, a Pirate Ship label. It would have to be sent from a UPS store.
I assume all the linkage and levers for throttle, Choke, and , manual oiler are in the zip lock bag?

it is 18x13x13 24lbas far as i can tell everything there, coil has tag that says no good but he dont remember if he sold original one my email is blume @pa.net phone 7177765237. hope i am allowed to do it

 

[Jay Hansen]

I forgot, I'll need his zip code too.

 

[ralph blume]

it is 18x13x13 24lbas far as i can tell everything there, coil has tag that says no good but he dont remember if he sold original one my email is blume @pa.net phone 7177765237. hope i am allowed to do it

it will come to me my zip is 17241 address 43 wildwood rd newville pa

 

[Jay Hansen]

I emailed you the link for the shipping label. I need your Paypal information so I can send the money.

 

[ralph blume]

I emailed you the link for the shipping label. I need your Paypal information so I can send the money.

email then GUNshop1948

 

[Jay Hansen]

I sent the money. I tried to send it "friends and family " but PayPal wouldn't let me.