Want to Buy Stihl 10mm 044 Crankshaft

[Anonym]

Long story short, I’ve been chasing a clanking sound in my 10mm 044 slant fin. Found it today after seeing some rotational slop in the flywheel. Case bearings and seals are good, wrist pin bearing is good, but crank to connecting rod pin/bearing is not. Anyone have a spare in good condition they would part with? In advance, I’ve already been doing some dealing with T_Fishaa and he is looking through his stash. I will probably see what he finds before committing to buy from another member, but getting some feelers out in case he comes up empty. Thanks!
View attachment IMG_5068.mov

 

[montana59]

All else fails, go to a 12mm. You will need a new piston. Pretty sure it will work maybe some one else will chime in.

 

[Anonym]

All else fails, go to a 12mm. You will need a new piston. Pretty sure it will work maybe some one else will chime in.

Yeah, I’ve been doing a little research. Looks like you have to do a little modification due to the size of thr balancers. Not really something I want to tackle if I can avoid it.

 

[Meadow Beaver]

I have one if you’re interested