Cylinder bore diameters

[KMB]

Was wondering if anyone can give me the cylinder bore diameters for the Stihl 046, Stihl 064, Husky 288XP and Olympyk 980/Oleo-mac 981/Efco 181. Thanks.

Kevin

 

[romeo]

Was wondering if anyone can give me the cylinder bore diameters for the Stihl 046, Stihl 064, Husky 288XP and Olympyk 980/Oleo-mac 981/Efco 181. Thanks.

Kevin

046 -- 52mm
064 -- 54mm
288 -- 54mm
281 -- 52mm
I don't know about the OlyMacEfco stuff but I would imagine they are probably 52mm bores.

 

[SawTroll]

...
281 -- 52mm
I don't know about the OlyMacEfco stuff but I would imagine they are probably 52mm bores.

I guess it has to be 52mm also, for the listed displacement to add up.....

 

[KMB]

046 -- 52mm
064 -- 54mm
288 -- 54mm
281 -- 52mm
I don't know about the OlyMacEfco stuff but I would imagine they are probably 52mm bores.

I guess it has to be 52mm also, for the listed displacement to add up.....

Thanks guys. I'm going to be ordering a flex-hone for my 044 rebuild and was curious to know what other saws it would fit. The saws I mentioned are ones that I've thought about for waaaayyyyy down the road if I could find one to rebuild (top end) for cheap, for a bigger saw for myself. But it looks like I would have to move up to a 2 1/8" diameter hone (from 2" for the 044) for the 064 and 288, but the 2" might work for the 980. For a Stihl, I would bypass the 046 and go to the 064. Converting the 970 to a 980 would depend on the cost of parts.

Kevin

 

[KMB]

I was re-reading my thread and I'm curious...why did you add this saw to the list...?

281 -- 52mm

Kevin

 

[Trigger-Time]

This was copied from a German ebay seller. I don't remember the sellers
name....could not find a seller by the name of flexparts

If you own this and want it removed......I will asap!

 

[KMB]

If you own this and want it removed......I will asap!

Thanks for the info! Not sure what you meant by the last part of your post...

Kevin

 

[Trigger-Time]

Thanks for the info! Not sure what you meant by the last part of your post...

Kevin

If the person that took the time to make up this chart, dos'nt
want it posted here............I will remove it.

(you know the legal thing)

 

[KMB]

If the person that took the time to make up this chart, dos'nt
want it posted here............I will remove it.

(you know the legal thing)

I understand...good on ya'. You deserve some more rep...but I'm out of ammo...

Kevin

 

[Trigger-Time]

I should add, the ebay seller was selling Piston and Cylinder kits
NOT the chart If he had been selling chart, I would
not have posted it.