Didier splitter

[Jwsuperxp]

I got this old didier splitter a while back for $60. After another $60 at the hydraulic shop to have the cylinder rebuilt it was up an running. Its old and not pretty but works good.

 

[Woodyjiw]

Seems like a damm good deal to me!!

 

[mtnwkr]

Nice man! I paid $200 for mine, I have about another 200 into the rebuild, so far so good.

 

[Kirk B]

Hello, I have joined the Didier ranks, finding an unmarked splitter. Reading thru many of the posts, it looks like I have an MF26. It runs and operates, but the valve is leaking. It is a Cross valve, no
model number found. This valve has an extra section on the opposite end of the handle compared to most of those pictured on the forum. It is leaking between the main body and this section. I have replaced the small O-ring with one from the hardware store between this section and the main body. No luck. I changed the O-rings on each of the valve body, no change. Does anyone know the model number of this valve and does anyone know how to stop this leak ? A copy of the manual would handy too, this splitter has no marking other than the Cross valve, and the B&S engine. Cylinder is not marked as well . Thank you for reading.