Herto
ArboristSite Lurker
This is my first proper build, I've done a couple of drill through the muffler type muff mods and a fair bit of saw tuning and repair.
Bought this 341 for £20, wouldn't run.
Bad fuel line. Snipped the bad bit out and bodged it back together.
It ran well then.
Next, muff mod.
I'll let the pics do the talking.
But cuts much better, quicker acceleration, more torque and holding higher rpms in the cut. I needed to lean on it to stop it four stroking.
I'll order some fuel line, pull the jug and do what I can to lightly improve supply. I want this to be a good general runner and not fussy.
Squish .031, hoping to drop it to .017-.020ish
More to come
Sparkplug mid cut, spalted beech and infected cookies.
Merry Christmas!
Bought this 341 for £20, wouldn't run.
Bad fuel line. Snipped the bad bit out and bodged it back together.
It ran well then.
Next, muff mod.
I'll let the pics do the talking.
But cuts much better, quicker acceleration, more torque and holding higher rpms in the cut. I needed to lean on it to stop it four stroking.
I'll order some fuel line, pull the jug and do what I can to lightly improve supply. I want this to be a good general runner and not fussy.
Squish .031, hoping to drop it to .017-.020ish
More to come
Sparkplug mid cut, spalted beech and infected cookies.
Merry Christmas!
Attachments
-
IMG_20231224_111956.jpg5.5 MB
-
IMG_20231224_112058.jpg6.4 MB
-
IMG_20231224_112043.jpg6 MB
-
IMG_20231223_182959.jpg6.6 MB
-
IMG_20231224_122517.jpg6.4 MB
-
IMG_20231224_123455.jpg6.1 MB
-
IMG_20231223_175152.jpg6.7 MB
-
IMG_20231223_182337.jpg6.3 MB
-
IMG_20231223_181212.jpg6.2 MB
-
IMG_20231223_175143.jpg6.8 MB