Dolmar 5100S Prices

[Works4me]

Has anyone seen any good deals on a 5100s?

Looks like Amick is the only one selling online.

Any dealers in the midwest marking the prices down from retail?

Dealer support is not that important to me unless a warranty issue would arise. I plan on doing most of the repairs myself

Thanks

 

[Cut4fun]

I have seen with 16" b+c from $369-$409 depends on the dealer.

 

[Scooterbum]

$349.95---18" bar 3/8 chain

 

[STLfirewood]

Where in Missouri are you? I have 2 Dolmar dealers within 12 miles of me. There is another abut 30 miles away.

Scott

 

[SawTroll]

The US prices are so low, that the exact details are not interesting over here, and that goes for all brands.........:chainsawguy: :chainsawguy:

 

[Works4me]

60 miles West

Where in Missouri are you? I have 2 Dolmar dealers within 12 miles of me. There is another abut 30 miles away.

Scott

I'm about 60 miles west of St. Louis, the 18" bar and 3/8 chain for $ 349 is a better price than I have been able to find.


Thanks for the info so far

 

[DaddyRabbit]

I'd like to find the cheapest dealer that sells Dolmar as I am going to buy a 7900 before the months end. Anybody?

 

[2000ssm6]

I'd like to find the cheapest dealer that sells Dolmar as I am going to buy a 7900 before the months end. Anybody?

Amicks would be your best bet. They have alot of goodies and knowledge there, take lotsa $$$$$. Hope to go back sometime,

 

[DOLMARatOs]

Cheapest Dolmar

I guess if AMick's is allowed to ship a Dolmar Mail-order then all the hype about no internet and mail-order Dolmar sales is useless?

I guess I'll get busy putting a couple hundred Dolmars on Ebay now. (Sarcasm)

Help me out on this one Scott.

 

[2000ssm6]

I guess if AMick's is allowed to ship a Dolmar Mail-order then all the hype about no internet and mail-order Dolmar sales is useless?

I guess I'll get busy putting a couple hundred Dolmars on Ebay now. (Sarcasm)

Help me out on this one Scott.

I was speaking to daddyrabbit, he is in NC, home of Amicks:jester:

 

[Four Paws]

I guess if AMick's is allowed to ship a Dolmar Mail-order then all the hype about no internet and mail-order Dolmar sales is useless?

I guess I'll get busy putting a couple hundred Dolmars on Ebay now. (Sarcasm)

Help me out on this one Scott.

opcorn:

 

[DOLMARatOs]

I saw that he was close enough to swing in and pick the unit up. For grins and tickles I went to their ste and scoped out prices, etc. It sure looks to me that a person could order, pay for and receive a Dolmar saw right through the mail.

 

[cuttinscott]

DaddyRabbit and Hornett22 if you do not want AS to BAN you I would remove a NON SPONSOR LINK from this thread!!!!!!!!!!!!!!!!!!!!

Rule #1 http://www.arboristsite.com/misc.php?do=page&template=Guidelines


Scott

 

[2000ssm6]

opcorn: opcorn: opcorn: opcorn: opcorn:

 

[cuttinscott]

I guess if AMick's is allowed to ship a Dolmar Mail-order then all the hype about no internet and mail-order Dolmar sales is useless?

I guess I'll get busy putting a couple hundred Dolmars on Ebay now. (Sarcasm)

Help me out on this one Scott.

Jay, I do not know how Amick's gets away with a Internet store!!!!!!!!! My Dist had told me and it is in our dealer contract that we cannot sell Dolmar products via a Internet store. I Do sell saws to members here on AS but they are from my DEMO fleet and are technically not new. I do not try to undercut a dealer in another area I always ask if they tried to locate a local dealer to buy from. But Yes Dolmar still has many areas that need good dealers. ALL SAWS I SELL VIA AS members or walk in's are gassed started and run. I WILL NOT SELL A SAW DRY WITHOUT TESTING!!!!!!! As far as my demo fleet I usually have numerous saws in my fleet in both the 5100 and 7900 as well as usually one in every other model and I do keep them in rotation and keep them fresh.

Scott

 

[Works4me]

DaddyRabbit and Hornett22 if you do not want AS to BAN you I would remove a NON SPONSOR LINK from this thread!!!!!!!!!!!!!!!!!!!!

Rule #1 http://www.arboristsite.com/misc.php?do=page&template=Guidelines


Scott

Not trying to start any problems here for members or others selling Dolmar saws.

Just trying to determine what would be a good price for a 5100s.

I thought a dealer might PM me with what he considers a fair price under
retail.

Or are Dolmar dealers like Stihl Dealers in my area and only sell retail price?

 

[04ultra]

Not trying to start any problems here for members or others selling Dolmar saws.

Just trying to determine what would be a good price for a 5100s.

I thought a dealer might PM me with what he considers a fair price under
retail.

Or are Dolmar dealers like Stihl Dealers in my area and only sell retail price?

Check with cuttinscott for a demo saw you cant go wrong......





.

 

[Freakingstang]

I guess if AMick's is allowed to ship a Dolmar Mail-order then all the hype about no internet and mail-order Dolmar sales is useless?

I guess I'll get busy putting a couple hundred Dolmars on Ebay now. (Sarcasm)

Help me out on this one Scott.

And buying a bunch of grinders to list on ebay to undercut other sellers is any differant?

Don't be a hypocrite.

 

[2000ssm6]

Ding Ding:sword: :sword:

 

[Tzed250]

And buying a bunch of grinders to list on ebay to undercut other sellers is any differant?

Don't be a hypocrite.

ouch...