Want to Sell EMAK Efco Telescopic Pole Pruner PTX2710 (1 lot)

[oldpartsinasia-joe]

Any takers for 1 lot of brand new Efco PTX2710 Telescopic Pole Pruners?
1 lot 40units.
Location: Malaysia


Helping my busness associate to clear their high stock inventories.
PM me if interested.

-oldpartsinasia Joe

 

[Mad Professor]

Price with shipping?

 

[oldpartsinasia-joe]

Price with shipping?

I will check for a pallet of 40pcs. Would you like to PM me your zip code?

-oldpartsinasia Joe

 

[oldpartsinasia-joe]

For 3 sets of PTX2710,
MACHINE COST ( EX-SINGAPORE) : USD1,950

FEDEX International Economy to Washington, 20005
SHIPPING COST: USD 530

Avg cost per unit: USD 830 (DAP WASHINGTON 20005)

-oldpartsinasia Joe

 

[oldpartsinasia-joe]

For the bold and courageous, if you can handle the freight and handling from Singapore to USA,
The price per unit for 30 units will be cheaper.

Note that the packing is into 2 separate carton ( power unit and the pole attachment).
Approx loose carton weight and dimension:
46X35XH27 CM, 7.5KG NETT, 8.6KG GROSS (the regular box that houses the power unit)
217X D12 CM, 5.5KG NETT, 6.5 KG GROSS (the long tube that houses the telescopic pole)

Shipping 3 sets together increases the strength of the long tube cartons.

EFCO dealers in US can hit me up, if all this makes economical sense.

-oldpartsinasia Joe

 

[oldpartsinasia-joe]

My business associate open to further price slash but need to take volume.
Interested parties can PM me asap.

-oldpartsinasia Joe

 

[oldpartsinasia-joe]

October 2023 well going into November 2023.
It's still on the table, people!

-oldpartsinasia Joe

 

[samhop]

hope you can get a group buy together maybe regular chainsaws also

 

[oldpartsinasia-joe]

Someone from US please start doing interest check!

 

[Bill G]

I am interested but I need a clear price on the units shipped to 61259. You said (1) lot was 40 units so what is the total price on 40 units? Or if you have them in smaller lots that is fine but I need clear numbers.

Bill

 

[oldpartsinasia-joe]

Hi Bill,

Let me recheck for 30 to 40 units.
I will PM you by next week.

-oldpartsinasia Joe

 

[Bill G]

Smaller lots are fine. What else do you have?

 

[oldpartsinasia-joe]

chainsaws, 1 man and 2 man earth auger, power cutters, mistblowers, backpack blowers. All Efco branded. Also Dolmar chainsaw parts.

 

[oldpartsinasia-joe]

Merry Christmas, peepz

 

[oldpartsinasia-joe]

Hi Bill,

Let me recheck for 30 to 40 units.
I will PM you by next week.

-oldpartsinasia Joe

Oh I think I own someone a reply

 

[oldpartsinasia-joe]

July 2024 Not sure if anyone is looking out for Pole Saw from EFCO?

-oldpartsinasia Joe

 

[Jim Colton]

For 3 sets of PTX2710,
MACHINE COST ( EX-SINGAPORE) : USD1,950

FEDEX International Economy to Washington, 20005
SHIPPING COST: USD 530

Avg cost per unit: USD 830 (DAP WASHINGTON 20005)

-oldpartsinasia Joe

It is difficult for my old brain to understand the above price structure Can you confirm that buying 3 units is the same as buying 120 complete polesaws that require attachment of the pole to the power unit and perhaps to the saw as well but would end up costing a down total of $2,480 or roughly $21 per saw if buying 120 saws at a single transaction. This all assuming there is no meaningful import tariff and allowing for a few months shipping time. Also noting that your friend has a variety of Efco branded chainsaws, 1-man and 2-man earth augers, power cutters, blowers, backpack blowers and Dolmar chainsaw parts.

Is that your pitch?

 

[oldpartsinasia-joe]

Yes. The pricing offered is only for the 3units of pole saws. The shape of the packing of the pole saw makes it difficult to ship unless someone has a container to US. PM me if you are looking for to get more units in one shot.

The rest are what my friend have to clear

-oldpartsinasia Joe

 

[oldpartsinasia-joe]

If you are here in 2024 November, PM me.

Frankly speaking 1pc unit of pole saw is also possible. Freight is just expensive from Asia to US. Trust is built over time.

Efco Dealers in the US, hit me up

-oldpartsinasia Joe