Fabz build thread poll

[cuinrearview]

 

[stihl sawing]

Well Fabz, if you said there would be a build thread, then ya might oughta do one. if you don't it just makes you look worse. also you can silence a lot of folks by proving you will. all the others porters have shown their work. nothing secret about doing it, just takes skill to master it. now if we get a thread it will be on this site cause he has been banned on all the other sites. Like the nike commercial" just do it"

 

[caffeine1fg]

Looks like I'm the only yes voter. Come on Frank make us believers. Don't be a make believer!

 

[Deleted member 135597]

Ain’t gonna happen. Remember he doesn’t do A+B to give you C for free.

 

[Frank Rizzo]

Well Fabz, if you said there would be a build thread, then ya might oughta do one. if you don't it just makes you look worse. also you can silence a lot of folks by proving you will. all the others porters have shown their work. nothing secret about doing it, just takes skill to master it. now if we get a thread it will be on this site cause he has been banned on all the other sites. Like the nike commercial" just do it"

Yah , thread is comin down the pipe ... don’t y’all get your panties in a bunch now ! Saw should be in my possession shortly

 

[Frank Rizzo]

Of course not. Hes a liar. Hes proven that over and over. His build thread would just be made up of stolen pictures anyway.

Haha ! You want some special sauce with that Crow ? Caw caw caw

 

[cuinrearview]

A couple YouTube vids is NOT a build thread Frank. You should search out what Brad, Randy, Dr Al, etc have done.

 

[wcorey]

Why bother with a build thread? Other than entertainment value of course...

It'll just be Frank dancing around mumbling incantations while dunking the saw into some steaming goo in the washing machine (read 'cauldron of performance') and then he won't even tell us all the ingredients in it anyway. Proprietary info an all...
What good will it do anyone if you don't know how many newts, stale beers, roadkill squirrel spleens and such are required?

 

[Frank Rizzo]

Why bother with a build thread? Other than entertainment value of course...

It'll just be Frank dancing around mumbling incantations while dunking the saw into some steaming goo in the washing machine (read 'cauldron of performance') and then he won't even tell us all the ingredients in it anyway. Proprietary info an all...
What good will it do anyone if you don't know how many newts, stale beers, roadkill squirrel spleens and such are required?

You forgot the most important ingredient ..... chicken gizzards ! Good for 5% gains right there, IF you are at least a Wizard of the First Order

 

[huskihl]

Will there be a stock cutting video? Also, what are your expectations for your gains in a Hot Woods Port 462?

 

[cuinrearview]

Will there be a stock cutting video? Also, what are your expectations for your gainz in a Hot Woods Port 462?

Fixed.

 

[huskihl]

If he can get a 30% gain with a 24" buried bar I'd quit giving him grief.


Maybe

 

[farmer steve]

If he can get a 30% gain with a 24" buried bar I'd quit giving him grief.


Maybe

30% gain ? Whatcha a smokin Willis? Hell I just wanna see him figure out how to take the bar nuts off.

 

[Frank Rizzo]

Will there be a stock cutting video? Also, what are your expectations for your gains in a Hot Woods Port 462?

Have to get Saw in my hands first guy! Plan on doing 1) 3 cuts stock .... 2) 3 muffler modded (stock filter) 3) with adapter and K/N filter and finally 4) flow enhanced ..... as far as gains I won’t give any % until I can map the cylinder ....

 

[Frank Rizzo]

If he can get a 30% gain with a 24" buried bar I'd quit giving him grief.

If I get 30% gains then I will have exceeded Crabby Cooter and of course Von Snelling!!!

 

[Frank Rizzo]

A couple YouTube vids is NOT a build thread Frank. You should search out what Brad, Randy, Dr Al, etc have done.

Yah ... The how’s and why’s will stay behind the shop walls guy ... I will show each phase and gain (or loss) along the way until I’m satisfied with the results !

 

[huskihl]

Have to get Saw in my hands first guy! Plan on doing 1) 3 cuts stock .... 2) 3 muffler modded (stock filter) 3) with adapter and K/N filter and finally 4) flow enhanced ..... as far as gains I won’t give any % until I can map the cylinder ....

You should show your videos as you progress. That way everyone can see the individual gains. Don't be scared to show your work. Some may give you shìt, but if you learn from it, you'll be better for it.

Plus, if you want to receive any work from forum members, theyll want to see what you're actually doing to their saw or chain.

 

[Frank Rizzo]

Ain’t gonna happen. Remember he doesn’t do A+B to give you C for free.

You are a real smart boy ! Tell me something smart boy ... whatcha gonna do when x+y+z comes down on you !

 

[cuinrearview]

Yah ... The how’s and why’s will stay behind the shop walls guy

So it's not gonna be a build thread eh? Same old Fabz BS.

 

[Deleted member 135597]

You are a real smart boy ! Tell me something smart boy ... whatcha gonna do when x+y+z comes down on you !

You got nothing bro, absolutely nothing. The only thing coming down is Uncle Sam on you. The call has already been made. Wait for the audit letter in the mail