FarmerTec MS200t Chainsaw Build Thread

[Warddc]

Lets see a pic of the tank breather they sent you maybe its usable?

The wrong style vent for this tank hose setup. I could probably cut the existing vent hose shorter and stick this white one on but it would flop around since there is no place to mount it. This vent goes with the tank that has the vent coming out of the tank to the left by itself.

 

[Bedford T]

Did ya replace those carb studs? Too short.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Warddc]

Did ya replace those carb studs? Too short.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

No. carb studs work fine. Not too short.

 

[lone wolf]

The wrong style vent for this tank hose setup. I could probably cut the existing vent hose shorter and stick this white one on but it would flop around since there is no place to mount it. This vent goes with the tank that has the vent coming out of the tank to the left by itself.

View attachment 726650

That will work cut it .

 

[lone wolf]

No. carb studs work fine. Not too short.

If all the threads on the mounting nuts are taken up they have added longer studs now.

 

[Bedford T]

No. carb studs work fine. Not too short.

Great. Glad that's fixed.

Prime your oil pump by hand to kick start it. Chances are it will help.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[67L36Driver]

That’s the worst one I’ve seen so far. [emoji90]

 

[67L36Driver]

Wrong valve all together.

I use the correct one with a side spigot. Save them off random MS290 types. [emoji106]

 

[lone wolf]

Wrong valve all together.

I use the correct one with a side spigot. Save them off random MS290 types. [emoji106]

Not altogether it will still work. cut the cheap fuel line and insert!

 

[Bedford T]

Not altogether it will still work. cut the cheap fuel line and insert!

Not a best practice for a work saw.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[lone wolf]

Not a best practice for a work saw.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

That could go for a lot of things on there!

 

[Bedford T]

That could go for a lot of things on there!

Yes you are right That's why you make changes. Your skill can make it work. It's on a busy day it quits working over some small thing you ignored.

So I said we disagreed. We offered using a proper vent and I offered a proper line as an option for the poster.

With changes that is a great saw, that I bet will be reliable long term. He even has a meteor cylinder for it. He cares

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Warddc]

I found another problem. The flange on the clutch drum stands up too proud of the surface. It doesnt allow the clutch to tighten down against the shoulder of the PTO shaft but rather against the drum. This keeps the drum from spining freely. I can probably grind that down enough to clear the shoulder.

 

[Warddc]

Also, does anyone have a part number for the combo Y fuel line and vent tube as well as the proper vent that goes with it? The IPL I have only shows the seperate fuel and vent line tank setup.

 

[lone wolf]

Yes you are right That's why you make changes. Your skill can make it work. It's on a busy day it quits working over some small thing you ignored.

So I said we disagreed. We offered using a proper vent and I offered a proper line as an option for the poster.

With changes that is a great saw, that I bet will be reliable long term. He even has a meteor cylinder for it. He cares

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

Well you get all arrogant about it! So carry on now all omniscient one!

 

[DND 9000]

The fuel hose in your picture some post above is 1129 350 3600. The proper vent for it is 0000 350 5802.

 

[grizz55chev]

Well you get all arrogant about it! So carry on now all omniscient one!

He’s got me on ignore, dudes a shill for the chi- com sh!t, I called him on his crap and he couldn’t handle it. You buy crap, you get what you pay for. Ain’t no pro going to buy that junk.

 

[Warddc]

The fuel hose in your picture some post above is 1129 350 3600. The proper vent for it is 0000 350 5802.

thanks. Is there an IPL published somewhere that shows this version of fuel and vent lines?

 

[Bedford T]

thanks. Is there an IPL published somewhere that shows this version of fuel and vent lines?

Pm your email I will send you one and service manual

One of the photos shows you the carb choke closed position too. You can see the lines as they enter the tank. How nicely the vent rests.

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy

 

[Bedford T]

I noticed today that my oil hose folds and shuts off in the way it falls naturally, that means no oil or less oil output which would make you suspect something is wrong with the oiler. The list is growing.

View attachment 678741

This is pitiful too

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy