That is a 1995 L2950 I welded 2x2 id tubing into the bucket in 4 places and then I made 2 different length 2x2 od "tines" I can change them out depending on what I need. They are slid into the tubes and through bolted with one 1/2 x 3 1/2 bolt with lock nut. The bucket clamp came on the tractor homemade by the previous owner to move brush with. I use it for so many things you just cannot imagine. I can lift 30' but cut of about any log up to about 20" in diameter. I use it when sawing tree length to stove length. I grab a log/ tree carry it to the splitter 50-60' feet away and saw into 16" length right beside the splitter. No more bending over to saw up stove wood for me. If this tractor or jaw failed today I would not hesitate to by new tomorrow that is how often I use it. I also made a weight box this summer 2'x2'x2' it is about 900# I use that to counter balance the weight of the tree length when lifting for sawing. It makes it much easier on the front end components I think.
