ford 300 6 motor shroud pic needed

[wahlturfcare]

i have a asplundh chipper and want to make some front and rear skins for the chipper to protect the motor as mine are missing, but need a pic of how they slide under the top cover as they have a 2 clamps on the bottom.

 

[ArborquipSP]

You must be talking about the engine side doors correct? I don't have any to take pictures of but they are shaped like a coat hanger end and the two pieces are bent so they lock together and are pulled down by the clips at the bottom.

Hope that helps.

Scott

 

[wahlturfcare]

Arborquip, yes they are the side doors. My top cover is smooth on the inside with no lip to hold the covers in.

 

[ArborquipSP]

I have not seen that style house yet I guess. I am getting a machine with a 4 Cyl Ford on it in today I will take some pictures of it for you. But I dont think they will help if your house is smooth.

Scott

 

[ArborquipSP]

Here is the 4 cyl house The 6 cyl house i have seen is the same but longer.

 

[wahlturfcare]

thanks scott. That pic does help. Mine doesnt have the lip on it, but i can easily put one on it though.

 

[ArborquipSP]

No problem glad I could help.

Scott