Full wrap handlebar for McCulloch Pro Mac's (10-10 or 700)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Just today...good news is they made some prototypes to check out. On the plus side, while they don't exactly match the original shape, they look very much like the full wrap on the SP80/81 type saws. On the negative side, they only really match up correctly with the RH start machines since that is what the original came from.

View attachment 589491

On the 4-10

View attachment 589492

View attachment 589493

View attachment 589494

It will also fit an LH start saw if you have the oldest version of the clutch cover, shown on the right.

View attachment 589495

But it is a tight fit on the starter and under the clutch cover.

View attachment 589496

View attachment 589497

These would be $50 to $75 depending on how many we can get lined up and order at a time, 15+ will get them for $50 each.

Mark
Are the full wrap handle availible for a 10-10? Thanks
 
Mark,
Do you still have the full wrap for a left hand pull start Pro Mac 10-10 from around 1977-1978? If you do, is there a conversion modification process?
 
I do have several available yet. If your saw has the older type of short clutch cover, no modifications are needed.

20200702_110437.jpg

If your saw has the long clutch cover it requires only a little filing to clear the lower frame.

20200702_105536.jpg

If your saw has the later version of the short clutch cover, more extensive modification will be required.

20200702_110154.jpg

20200702_110151.jpg

IMG_0893.jpg

Mark
 
I would like to buy one. How much are they and how do I get you the money? See the picture of my saw that is attached. Will they fit on if I keep the chain brake clutch on? Or will I need to remove it.
 

Attachments

  • s-l1600.jpg
    s-l1600.jpg
    611.8 KB
Back
Top