OregonSawyer
ArboristSite Operative
Really tempting! I might pull the trigger one of these days... Seems like it would really be great for a landing saw.
Full-wrap handles are ready!
- Thread starter Metals406
- Start date
Help Support Arborist Forum:
tramp bushler
Addicted to ArboristSite
- Joined
- Feb 3, 2007
- Messages
- 3,376
- Reaction score
- 633
Not planning to Nate, I traded my older 460 . still have the newer one with the hb I got from Jamison.
My plan is to go to 390 s . Hope to be getting my 1st one in a couple weeks.
But any 440-660 would greatly benifit from having a Weber on it.
Actually this week I was running a half wrap 460 . But it was all orange and said Husky on it.
I was cutting powerline row for a local dirt + brushing outfit. It had a 24" bar. 3/8 ,050 full skip round chisel. .
workin by the hour I'll run company saws.
My plan is to go to 390 s . Hope to be getting my 1st one in a couple weeks.
But any 440-660 would greatly benifit from having a Weber on it.
Actually this week I was running a half wrap 460 . But it was all orange and said Husky on it.
I was cutting powerline row for a local dirt + brushing outfit. It had a 24" bar. 3/8 ,050 full skip round chisel. .
workin by the hour I'll run company saws.
I agree. If they made one for a 460 I'd buy it today.
Metals406
Granfodder Runningsaw
They're good on any saw! :msp_biggrin:
Ewww, them orange 460's aren't like running an orange and grey 460. LOL
390 eh?
I'm pushing on Rod hard to get templating on the Husky wraps.
Metals406
Granfodder Runningsaw
Metals406
Granfodder Runningsaw
Yes, but it will cost you a piece of gum, rubber band, and $250 cash.
Custom ones would have to be by the hour, and it takes several hours to do the first one of any saw. . . Subsequent runs go faster because it was mostly figured out on the first.
ShaneLogs
Addicted to ArboristSite
Yes, but it will cost you a piece of gum, rubber band, and $250 cash.
Custom ones would have to be by the hour, and it takes several hours to do the first one of any saw. . . Subsequent runs go faster because it was mostly figured out on the first.
Ok, I will let you know if I decide to get one from you.
Metals406
Granfodder Runningsaw
ShaneLogs
Addicted to ArboristSite
Find a 044 or 046, and you can get a handle fer that.
Will do!
Randy, there should be ones fer sale on the website for 044/046.
Thanks.
Metals406
Granfodder Runningsaw
Rakoprtr
ArboristSite Operative
I need one for a stihl 041 thanx much
balm
ArboristSite Lurker
when will I be able to buy one for my 372?
Metals406
Granfodder Runningsaw
Soon. . . I did the doctor thing all morning fer my son's broken arm -- and then dropped by Rod's. He was busy making 066 handles.
I think his goal is 20 in 066 and 20 in 044/046 done and ready to ship, so he has a reasonable inventory. Then he's going to put all his attention on the 372 to get it mocked up and ready for a production run.
Metals406
Granfodder Runningsaw
Probably won't happen fer the 041 pard. . . He's just looking to build fer the most widely used saws.
Metals406
Granfodder Runningsaw
Just fer a quick reference here fellas, these are priced right there with other aftermarket full-wraps.
But I think you'll find these to be of superior quality. :msp_smile:
But I think you'll find these to be of superior quality. :msp_smile:
tramp bushler
Addicted to ArboristSite
- Joined
- Feb 3, 2007
- Messages
- 3,376
- Reaction score
- 633
How bout tha 390 Husky? in 1" . ??
Those are priced less than retail for a stihl 3/4 wrap handle. I think a 660 handle is aroun $150 at most dealers.
Sport Faller
Gate Pimp
Please have him build on for my Mall 3MG, I need it by the end of the week if possible
Similar threads
