Hr woodsman
ArboristSite Lurker
Well Randy, I found another old saw that you can fool around with.
So put me first in line for the haul back if there's any vacant space.
Georgia spring 2015 GTG (May 30, 2015)
- Thread starter fearofpavement
- Start date
Help Support Arborist Forum:
So put me first in line for the haul back if there's any vacant space.
Mastermind
Work Saw Specialist
Well Randy, I found another old saw that you can fool around with.
So put me first in line for the haul back if there's any vacant space.
Cool.
How's that 262 running?
Hr woodsman
ArboristSite Lurker
262 runs great, just as expected. Hasn't seen a lot of use though. Got to find time to start hauling out a few logs.
It will be there on the 30th for all to run.
hseII
Addicted to ArboristSite
I Vish I Could, I Vish I Could.
Signed,
Jealous in Russia[emoji13][emoji13][emoji13]
zogger
Tree Freak
Hey man! I bet if you shipped back to yourself (in several boxes, taken apart as spare parts) one of them rooski bicycle handlebar pivoting saws, someone here would buy it.
Anyone want to ride down with me? I am near Asheville nc
hseII
Addicted to ArboristSite
I can't even ship a saw from Virginia to Georgia without a Bunch of Chit getting started!!! I'd probably be cast to Siberia over the above.
I though ToMas' BF was going to break out the gloves on me in Richmond.
Check out Russian Shop that carry chainsaw
hseII
Addicted to ArboristSite
Roll Tide
Trolltide
Well I have to count myself out. I just found out I'm leaving Sunday to Denver for 3 weeks. I hate that I'm gonna miss it.
lucky_dad01
ArboristSite Member
Denver, what for ??
Nun of my business probably !!
Sent from my iPhone using Tapatalk
Nun of my business probably !!
Sent from my iPhone using Tapatalk
Roll Tide
Trolltide
Mastermind
Work Saw Specialist
Yo Chris.
I just finished porting that 200T.
Lost it for a bit.
I just finished porting that 200T.
Lost it for a bit.
lucky_dad01
ArboristSite Member
Cool [emoji4][emoji4]
When's she coming home ??
I might be able to make it to this GTG if it ready by then.
Maybe a hand off ??
Sent from my iPhone using Tapatalk
When's she coming home ??
I might be able to make it to this GTG if it ready by then.
Maybe a hand off ??
Sent from my iPhone using Tapatalk
Mastermind
Work Saw Specialist
Jon's gonna test run it in a little while. Might come home soon.
fearofpavement
Trying them all
Ok, this not being able to edit posts is going to be a problem. I intended to put updates for the GTG in the first post like I did before so people don't have to go through pages and pages of posts to find pertinent information. Guess I'll start another post with the info so it can be found. I don't think this inability to edit posts is helpful in any way. If someone makes a spelling mistake or other error they can't go back and fix it. That sucks.
fearofpavement
Trying them all
The address that will bring you close with a GPS is 523 Green St. Concord, GA 30206.
This is a residence that is near the airbase where the GTG is being held.
We're about an hour or so south of Atlanta, GA. About an hour from Macon and a little over an hour from Columbus, GA.
You don't want to come through Atlanta at rush hour so plan accordingly. On Friday, you'll want to avoid from 4pm to 7pm.
The GTG will start about 9am on Saturday the 30th if May. It will go until dark or until people leave.
Food will be provided. Beverage will be provided (lemonade and water). If you want soft drinks or sweet tea, bring your own. We will have ice available for them.
Bring desserts if you want to bring something.
Food provided will be simple with the menu consisting of hotdogs, venison/sausage burgers/chips/beans/ and maybe some slaw or tater salad. We will also supply plates, cups, flatware, etc.
There is room to camp if you are self contained. If you plan to arrive before Saturday, let me know as you'll need better directions since the signs won't be out yet.
No alcoholic beverages please.
Bring your own PPE such as chaps, safety glasses, ear plugs, etc.
Bring your own fuel/oil if you bring saws to run.
Feel free to bring any saws to run, trade, sell, etc. There will be saws available for sale so either bring money if you would like to buy one or leave your money home if that will be too powerful of a temptation. We can't be responsible for CAD attacks and they are likely to occur at an event such as this...
Spouses and children are welcome. Children will need close supervision. This is adjacent to an active airstrip with sailplane activity. Sailplane rides may be available for a fee, depending.
If you want to take some cookies (wood slices) home with you, feel free to do that.
We have plenty of logs on site. (could use a big log or two if someone nearby has one handy and can move it...)
We have a covered area we can utilize if necessary so this event will take place rain or shine. We will set up in an airplane hangar. Bring camp chairs if you like. We will have some chairs and also have some table/bench space to display and work on saws. There is a thread from last years GTG which has a lot of info and pics in it if you want to know a little more.
If someone needs additional info, pm me or call me at 770-584-9020 between the hours of 9am and midnight.
Ya'll come!
Stihl 018C, Stihl 019T, Stihl 026 x 3, Stihl 036, Stihl 039, Stihl 044 x 2, Stihl 046, Stihl MS460, Stihl MS660 x 2, Stihl 070, Stihl HT101 pole saw. Lots of project saws of varying brands.
This is a residence that is near the airbase where the GTG is being held.
We're about an hour or so south of Atlanta, GA. About an hour from Macon and a little over an hour from Columbus, GA.
You don't want to come through Atlanta at rush hour so plan accordingly. On Friday, you'll want to avoid from 4pm to 7pm.
The GTG will start about 9am on Saturday the 30th if May. It will go until dark or until people leave.
Food will be provided. Beverage will be provided (lemonade and water). If you want soft drinks or sweet tea, bring your own. We will have ice available for them.
Bring desserts if you want to bring something.
Food provided will be simple with the menu consisting of hotdogs, venison/sausage burgers/chips/beans/ and maybe some slaw or tater salad. We will also supply plates, cups, flatware, etc.
There is room to camp if you are self contained. If you plan to arrive before Saturday, let me know as you'll need better directions since the signs won't be out yet.
No alcoholic beverages please.
Bring your own PPE such as chaps, safety glasses, ear plugs, etc.
Bring your own fuel/oil if you bring saws to run.
Feel free to bring any saws to run, trade, sell, etc. There will be saws available for sale so either bring money if you would like to buy one or leave your money home if that will be too powerful of a temptation. We can't be responsible for CAD attacks and they are likely to occur at an event such as this...
Spouses and children are welcome. Children will need close supervision. This is adjacent to an active airstrip with sailplane activity. Sailplane rides may be available for a fee, depending.
If you want to take some cookies (wood slices) home with you, feel free to do that.
We have plenty of logs on site. (could use a big log or two if someone nearby has one handy and can move it...)
We have a covered area we can utilize if necessary so this event will take place rain or shine. We will set up in an airplane hangar. Bring camp chairs if you like. We will have some chairs and also have some table/bench space to display and work on saws. There is a thread from last years GTG which has a lot of info and pics in it if you want to know a little more.
If someone needs additional info, pm me or call me at 770-584-9020 between the hours of 9am and midnight.
Ya'll come!
Stihl 018C, Stihl 019T, Stihl 026 x 3, Stihl 036, Stihl 039, Stihl 044 x 2, Stihl 046, Stihl MS460, Stihl MS660 x 2, Stihl 070, Stihl HT101 pole saw. Lots of project saws of varying brands.
Mastermind
Work Saw Specialist
Looks like I'm gonna have to stay home.
Cattle and stuff.
Cattle and stuff.
fearofpavement
Trying them all
Not acceptable. Make it work!Looks like I'm gonna have to stay home.
Cattle and stuff.
Similar threads
