GTG at Tree Monkey's DEC. 6 Augusta, WI

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Best is fresh ones that are warm and dripping wet.
Wet bad...
Best is cold and dipped in Top the tater from the Burnett cheese store....

Fried curds......
Those may be the 8th wonder of the world...
Had some in Rush City last year...
Freaking awesome...
 
Marc where is that dairy

North on 27, West on County Road MM just before you get to Hwy. 29. 1.5 miles or so from 27. Good stuff, the farm you see next door to the store is the owner and only supplier of milk to the plant. Their Nitro Pepperjack is good too.
 
North on 27, West on County Road MM just before you get to Hwy. 29. 1.5 miles or so from 27. Good stuff, the farm you see next door to the store is the owner and only supplier of milk to the plant. Their Nitro Pepperjack is good too.
They open on Sundays?
 
North on 27, West on County Road MM just before you get to Hwy. 29. 1.5 miles or so from 27. Good stuff, the farm you see next door to the store is the owner and only supplier of milk to the plant. Their Nitro Pepperjack is good too.

Sounds like its close to Scott's place. Maybe you should go get us a treat for Saturday.
 
Yellowstone is open..I'm pretty sure normal hours mon.-sat. and like 10-5 on sun. There is another local farmer/cheese plant in Augusta that makes curds too, maybe Scott knows them. I'll try to bring some Yellowstone curds for Saturday.
 
killed my 111 dolmar tonight I guess, turned a bunch of rpm's in the cut them stopped
started it again, it runs rough (like somethings broke) and about 5k guess i got an air leak in a cut,
odd stuff... the awol 590 was hauling serious tail threw some random hard wood
its i great running work saw! I didnt clean it too good...its getting dirty again :)
 
killed my 111 dolmar tonight I guess, turned a bunch of rpm's in the cut them stopped
started it again, it runs rough (like somethings broke) and about 5k guess i got an air leak in a cut,
odd stuff... the awol 590 was hauling serious tail threw some random hard wood
its i great running work saw! I didnt clean it too good...its getting dirty again :)

Not good to lose a saw like that. Guess you better order up a 2253
 
Back
Top