Help needed. ID Oregon laser weld bar

[Big feller]

Can anyone help ID an Oregon bar?

New old stock - 5 yrs plus old.

24 in. Numbers 24422 en 243atmh009

Any ideas what it might fit and what gauge?

Thanks.

 

[Cut4fun]

Try this. http://www.brownandwiser.com/oregon_bars.html
Maybe? fits these http://www.brownandwiser.com/d009.html
is it hardnose bar? .063 gauge. med tip. Maybe new D009 old H009?

 

[2stroke2]

Hi Big feller. I could tell you mate, but Im not going to cause you might bid against me. If it was in Austrailia I would tell you no problem.
No hard feelings I hope

 

[Cut4fun]

I did find a ole H009 and it showed these saws. Husquavarna saws: 65, 162, 181, 240, 380, 1100, 2100,.
So is D009 the newer version of this bar.
Might this be the bar in question? http://cgi.ebay.co.uk/CHAINSAW-BAR-...ryZ20538QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


DOLMAR-PS9000
HUSQVARNA-61, L SERIES: 65, 66, 70, 77; 160, 162, 181, 185, 260, 266, 268, 272, 281, 285, 288, 298, 365, 371, 380, 394, 395XP, 480, 1100, 2100, 2101, 3120
JONSERED-625, 630, 630 SUPER, 630 WEST COAST, 670, 670 WEST COAST, 2063, 2065, 2071, 2077, 2083, 2094
MAKITA-DCS6800i, DCS9000
PARTNER-550, 650, 1655, 2055, 7000, P-55, P-65, P-70, P-85, P-100, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
POULAN/POULAN PRO-415, 425, 445, 475, 505
SHINDAIWA (SDK)-550, 575, 577, 680, 695, 757
SOLO-603, 662, 667, 670, 680, 690

 

[Big feller]

Hi Big feller. I could tell you mate, but Im not going to cause you might bid against me. If it was in Austrailia I would tell you no problem.
No hard feelings I hope

Well spotted! Let me know if you are going to bid and I'll stay out of it.

I was thinking about it for my 045, but it looks as though it wouldn't fit.

Thanks all for the quick replies.