Help on buying saw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
SB, 350, 346, 351, Oil pump, 2002-03
If the oil flow is too low and a higher flow is desired, the pump piston from model 357 or 359 can be
fitted. This is estimated to increase the oil flow by around 40%. The pump piston for models 357/359
has a black oxidised finish.
Note that when pump piston 537 06 93-01 is fitted to models 350, 346 or 351 the oil tank will be
emptied before the fuel tank.
New part no. Description Excl. part no. Remark
537 06 93-01 Pump piston 357, 359
537 06 91-01 Pump piston 350, 346, 351
 
Get yourself a Dolmar 520 or 540 and never look back. Rock solid tough. light and good power.
 
I have had customers complain about the lack of oiling on the new Jonsered and Husvarna mid sized saws (346, 350, etc.). I run them and don't have a problem. But some do. Anyway, You can replace the oiler pump piston with the one that is for the 2159, 359 and it is supposed to increase oil output by 25%. The oil tank should empty before the fuel tank. I put one in for a chronic complainer a couple weeks ago and he hasn't come back since.
Worth a try,
Stevie
Can the same be done for a 2165
 
Back
Top