Help!!!! Qd bushing for asplundh chipper

[grump507]

HI
i have a 1985 asplundh chipper jey19684. the qd bushing/hub that goes in the big flywheel broke. the part num. is 870150046. does anyone have one or know where i can get one.

 

[Eq Broker]

Do you think the part number is a Asplundh part number or the manufacturers part number who made the bushing? I might be able to help you. If you can find a part number on the sheave/pulley and let me know the shaft size, I might be able to get you one. If it was proprietary to Asplundh, it could be very difficult in obtaining.

Let me know and I'll see what i can do to help you.

Thanks,

Dave
Global Equipment Exporters

 

[grump507]

hi thanks for reply

yes that is the asplundh number. they have 1 in stock but for 365.00 which is alot more then i want to spend as i just spent 400.00 on the bearings and im doing this just to sell it. im gonna try and get the wheel off today and ill see if there are any other numbers and check the measurments. thanks again for the reply
bill

Do you think the part number is a Asplundh part number or the manufacturers part number who made the bushing? I might be able to help you. If you can find a part number on the sheave/pulley and let me know the shaft size, I might be able to get you one. If it was proprietary to Asplundh, it could be very difficult in obtaining.

Let me know and I'll see what i can do to help you.

Thanks,

Dave
Global Equipment Exporters

 

[chipdelia]

Power in Motion

I bought mine at Power in Motion at a much better price. I think it was about $180. They also have the bearings at about half the price. Home . Any good industrial bearing house will be able to help you. It not unusual to break them when you take the fly wheel weight off.

yes that is the asplundh number. they have 1 in stock but for 365.00 which is alot more then i want to spend as i just spent 400.00 on the bearings and im doing this just to sell it. im gonna try and get the wheel off today and ill see if there are any other numbers and check the measurments. thanks again for the reply
bill

 

[Steve-Maine]

Qd Bushing

I buy mine from Motion Industries, in fact all my bearings, They are usually 1/3 to 1/2 cost of dealer. Good Luck.

I bought mine at Power in Motion at a much better price. I think it was about $180. They also have the bearings at about half the price. Home . Any good industrial bearing house will be able to help you. It not unusual to break them when you take the fly wheel weight off.

 

[chipdelia]

Your right Steve, Motion Industries. I keep remembering their old tag line Motion in power.

I buy mine from Motion Industries, in fact all my bearings, They are usually 1/3 to 1/2 cost of dealer. Good Luck.

 

[grump507]

i got it

hi
i finally got it!! thanks for input

 

[vettes1995]

Same thing just happened to me. thanks for the info. trying to send the drum to a machine shop to be worked on. not very easy to get it off though. seems i have to strip the whole shaft to remove it.