Withdrawn Homelite bars over 24”

[ATS MS]

Good morning all,

I’m looking to purchase bars over 24” for homelite 925 and C series / 1050 saws.

 

[ATS MS]

Good morning all,

I’m looking to purchase bars over 24” for homelite 925 and C series / 1050 saws.

I’ve attached pics for reference. The F014 (Oregon) would be a .404 pitch and the 196/096/023 would be 3/8 pitch.

Thank you.

 

[Vibes]

I have an Oregon bar .It's stamped 36/80. 32 inch 105 DL. Came with a Jonsered 820 Good user bar. Will need dressed. I remember guys in my area running J-Red stamped bars on old big Homelites. Any interest?

 

[ATS MS]

I have an Oregon bar .It's stamped 36/80. 32 inch 105 DL. Came with a Jonsered 820 Good user bar. Will need dressed. I remember guys in my area running J-Red stamped bars on old big Homelites. Any interest?

Thank you, but that slot is 10mm and likely a little more by now if used. Would be a tad loose on my model.

 

[Bill G]

I have an Oregon bar .It's stamped 36/80. 32 inch 105 DL. Came with a Jonsered 820 Good user bar. Will need dressed. I remember guys in my area running J-Red stamped bars on old big Homelites. Any interest?

I would be interested in that bar.