S sanleonscott ArboristSite Lurker Joined Dec 17, 2006 Messages 9 Reaction score 0 Location 16229 Dec 17, 2006 #1 can anyone tell me why i have to use starting fluid to get my little xl going when cold?once warm,it's fine.thanks
can anyone tell me why i have to use starting fluid to get my little xl going when cold?once warm,it's fine.thanks
B Bill G ArboristSite King AS Supporting Member Joined Mar 5, 2002 Messages 35,900 Reaction score 35,245 Location Illinois Dec 17, 2006 #2 Ether in a saw is a recipe for diaster. Check the compression. If it is low then that is a problem Bill
Ether in a saw is a recipe for diaster. Check the compression. If it is low then that is a problem Bill
retoocs555 Addicted to ArboristSite Joined Sep 4, 2005 Messages 1,050 Reaction score 66 Location Vermont Dec 18, 2006 #3 Your choke may not be closing all the way. Keep ether, go-juice as I call it, out of your saws. You'll fry the engine. Better to squirt a little fuel mix down the carb throat. What's this have to do with an EZ-6 on Ebay?
Your choke may not be closing all the way. Keep ether, go-juice as I call it, out of your saws. You'll fry the engine. Better to squirt a little fuel mix down the carb throat. What's this have to do with an EZ-6 on Ebay?