Homelite super xl auto need fuel line and? w/pictures

[Work Saw Collector]

Here is some pictures of my saw, it runs good have changed the fuel line 3 times different one every time. I can't find a line that fits carb and the hole in the tank is this saw missing something. leaks out the tank hole bad when it's on its side.

Anyone know what I need or have what I need?

Focus on the saw!

Here is fuel line from carb to tank.

Numbers on saw

 

[Work Saw Collector]

Bumping this back to the top

Does no one know what I need?

 

[PES+]

Pull the line out....and measure the hole in the tank....use drill bits to best guess if neccesary.

There were several different fuel line set ups in a lot of Homelite models so if you can tell me the size I can give you some solutions

 

[Work Saw Collector]

Pull the line out....and measure the hole in the tank....use drill bits to best guess if neccesary.

There were several different fuel line set ups in a lot of Homelite models so if you can tell me the size I can give you some solutions

I'll go to shop and do that thanks.

 

[blackoak]

Here is some pictures of my saw, it runs good have changed the fuel line 3 times different one every time. I can't find a line that fits carb and the hole in the tank is this saw missing something. leaks out the tank hole bad when it's on its side.

Anyone know what I need or have what I need?

Focus on the saw!

Here is fuel line from carb to tank.

Numbers on saw

It missing a grommet that the fuel line goes through.

 

[spankrz]

how DARE you set that homelite on your 2009 stihl calendar


and to answer your question, the only repair for any homelite is a ms 361

 

[Work Saw Collector]

how DARE you set that homelite on your 2009 stihl calendar


and to answer your question, the only repair for any homelite is a ms 361

Funny
I got 2 of them, this is grandpa's old saw I try to keep it running.

 

[Work Saw Collector]

It missing a grommet that the fuel line goes through.

That makes sence if i get one big enough to seal hole its too big for carb

 

[Work Saw Collector]

Pull the line out....and measure the hole in the tank....use drill bits to best guess if neccesary.

There were several different fuel line set ups in a lot of Homelite models so if you can tell me the size I can give you some solutions

Looks like I need 5/16 I'll see if I can find a sponser that sells a gromit and line that size thanks. The drill bid thing did the trick

 

[PES+]

Yup

That one should be the molded one piece with the built in grommet

Contact Calvin lawnmowertech or edge and engine with your UTC number and they should be able to look it up

 

[Work Saw Collector]

That one should be the molded one piece with the built in grommet

Contact Calvin lawnmowertech or edge and engine with your UTC number and they should be able to look it up

edge and engine had a ipl looked it up and got it on order thanks all.

 

[lawnmowertech37]

just letting you know grommet 68046 is what you needed i have plenty of them $ 1.29 each

 

[Roger075]

Hello Lawnmowertech3,
I see that it's been 10 years since your offer but do you still carry the 68046 grommets?
Thanks,
Roger

 

[mels]

He hasn't been on here since 2012

 

[Roger075]

Mels, thanks for the heads-up.
Roger

 

[a. palmer jr.]

He hasn't been on here since 2012

Yeah, someone kinda got under his skin and he just left..I've seen him on other sites using his same handle.

 

[Little Al]

Yeah, someone kinda got under his skin and he just left..I've seen him on other sites using his same handle.

Don't know about that, I would guess the other way around He was bleating on one of the other forums about having stacks of kit & nobody was buying So I sent an inquiry for around $50 worth of kit & he replied could I include an extra $20 towards buying him a new pair of shoes to enable him to go to some religious GTG. I replied to the effect that that was down to him, I would pay the price for the parts but not his personal kit He replied that I was uncaring & that he would not sell me the parts, that was 2012 or so & not seen/heard of posts since then not that it's problem to me as I wouldn't now buy even if he chose to sell.

 

[DSS]

Don't know about that, I would guess the other way around He was bleating on one of the other forums about having stacks of kit & nobody was buying So I sent an inquiry for around $50 worth of kit & he replied could I include an extra $20 towards buying him a new pair of shoes to enable him to go to some religious GTG. I replied to the effect that that was down to him, I would pay the price for the parts but not his personal kit He replied that I was uncaring & that he would not sell me the parts, that was 2012 or so & not seen/heard of posts since then not that it's problem to me as I wouldn't now buy even if he chose to sell.

Hi Al, long time no see. Hope all is well.

Yes, Calvin is famous for being a bit of a scam artist. I tried to buy parts from him years ago too, and although he never asked for shoes, he never got back to me about the parts either.

 

[BWS-LLC]

Don't know about that, I would guess the other way around He was bleating on one of the other forums about having stacks of kit & nobody was buying So I sent an inquiry for around $50 worth of kit & he replied could I include an extra $20 towards buying him a new pair of shoes to enable him to go to some religious GTG. I replied to the effect that that was down to him, I would pay the price for the parts but not his personal kit He replied that I was uncaring & that he would not sell me the parts, that was 2012 or so & not seen/heard of posts since then not that it's problem to me as I wouldn't now buy even if he chose to sell.

Yup...

Chris hit the nail on the head, he's a scam artist


Here is his latest post on FB, he's still at it. If you want good reading search for Calvin Meadows of FB and read his posts...

can anyone help get me home with a bus ticket it costs 98.00 and i am running out of heart meds i do not have any clothes hardly now cause all my clothes was in the vehicle if anyone can help please call me the number to the mission i am at is 828-246-0332

Like

 

[BWS-LLC]

He's always looking for doughnations