The saw starts right up if a thimble full of gas is poured into the carb throught. I've taken the carb completely apart and used carb cleaner to get all the gum out. Still it will not allow gas from the tank to get through.
Any ideas?
My computer isn't running right, so you will have to check it out goto tillotsons site, they have alot of good info on the carbs. go to tech info then to service manuals you can get the HL manual there. I dont know if it will help or not but it will give you some info on it.
It will work on my other computer just not on this one (Microcrap OS). By the way I sent you a PM for some kits for sale, you may want to contact the guy and see if it will fit your carb first.