ehp
Addicted to ArboristSite
if the truth was to be knowing then you would not be shuting you mouth off, cause you donot know everything, and when you do know something let me know,
Hotsaws
- Thread starter dneiger
- Start date
Help Support Arborist Forum:
MEANHUSQVARNA
ArboristSite Member
One more thing im not the one for looking gas money!If I was half as good as you think you are I would get a sponser.
ehp
Addicted to ArboristSite
that would make alot of sense now wouldn't it , me building saws and looking for a sponsor, somehow that does not look very good , plus gas money is not a problem for me hope the same for you ,
I get most of Husky's sponsorship money for Canada anyhow, I build Darryl's saws and he is the only guy that i know for a fact that gets a pay cheque from Husky, he gets $3000 a year plus any parts he needs or saws
I get most of Husky's sponsorship money for Canada anyhow, I build Darryl's saws and he is the only guy that i know for a fact that gets a pay cheque from Husky, he gets $3000 a year plus any parts he needs or saws
Marky Mark
Hell's Kitchen Trapper
MEANHUSQVARNA
ArboristSite Member
ehp,
in the first place I wasn't talking about all the saws in canada.
I was talking about Ed and his saws not Marcel Vincents.
in referance to the phrase when i know something let you know. Last year at Kapuskasing when Lorny won with one of Cliff's saws where were you and all your fast saws and refering to the great show of Minden again where were you and all your fast saws when Bill { a man from Michigan } won last year. The last two times Bill raced you he beat you. once on 8 x 8 and once on 15 inch so you know what you can do with that long bar.
Where were all your saws when Jerry smoked everbody up there?
Where were you and all your saws when E. J. won Mattawa last year? So the guys from Michigan must have made it up there.
Ed can't make it to Michigan to find out where the Bull S--- in the Buckwheat, he has real important shows he has to make so everyone should monitor those shows and find out where Ed places and Time will Tell.
in the first place I wasn't talking about all the saws in canada.
I was talking about Ed and his saws not Marcel Vincents.
in referance to the phrase when i know something let you know. Last year at Kapuskasing when Lorny won with one of Cliff's saws where were you and all your fast saws and refering to the great show of Minden again where were you and all your fast saws when Bill { a man from Michigan } won last year. The last two times Bill raced you he beat you. once on 8 x 8 and once on 15 inch so you know what you can do with that long bar.
Where were all your saws when Jerry smoked everbody up there?
Where were you and all your saws when E. J. won Mattawa last year? So the guys from Michigan must have made it up there.
Ed can't make it to Michigan to find out where the Bull S--- in the Buckwheat, he has real important shows he has to make so everyone should monitor those shows and find out where Ed places and Time will Tell.
ehp
Addicted to ArboristSite
As far as Bill, Bill is a good friend and he is a good guy, Yep he won Minden last year by .001 of a second over Woodland with a non stroked 3120, and yep Bill beat me at Larry's or Lorny's but i was second using a new saw that has the pipe on the otherside,
the time before that would of been Mashsam Quebec, but they seem to have forgot about that , and why wouldn;t they, for some reason this sounds alot like Woodjunkie but i must be wrong,and we are not talking about the rest of Canada , there are only a few Marcel saws left now out here, you seem to want to bring out the bad stuff like when stuff goes wrong and I only get a 2nd or cut out but when thing go right you seem to forget about that, everyone that races knows that i have not done many shows the last two years and if i had not worked so much on the shows here in the last 2 years there would be very few shows so you tell me what is better , me help put the shows on or no shows for anybody cause if i didnot do them they would not run it is a simple as that, so now Cecil is to take over so i can go play when i want
and as far as Mattawa, it is a show for non pros , if you are a pro they donot want you there , the year before EJ went Hugh went and won all the classes and they told him never come back
now that we on to this what have you done , placed or won, i would like to here
one more thing did any body measure the wood at Mio last year for the standing chop, it was 10 inch round and Cecil needs one of you guys to say yes it was so they will give him the new world record for it cause they are saying it was smaller but it was not
the time before that would of been Mashsam Quebec, but they seem to have forgot about that , and why wouldn;t they, for some reason this sounds alot like Woodjunkie but i must be wrong,and we are not talking about the rest of Canada , there are only a few Marcel saws left now out here, you seem to want to bring out the bad stuff like when stuff goes wrong and I only get a 2nd or cut out but when thing go right you seem to forget about that, everyone that races knows that i have not done many shows the last two years and if i had not worked so much on the shows here in the last 2 years there would be very few shows so you tell me what is better , me help put the shows on or no shows for anybody cause if i didnot do them they would not run it is a simple as that, so now Cecil is to take over so i can go play when i want
and as far as Mattawa, it is a show for non pros , if you are a pro they donot want you there , the year before EJ went Hugh went and won all the classes and they told him never come back
now that we on to this what have you done , placed or won, i would like to here
one more thing did any body measure the wood at Mio last year for the standing chop, it was 10 inch round and Cecil needs one of you guys to say yes it was so they will give him the new world record for it cause they are saying it was smaller but it was not
woodsjunkie
Addicted to ArboristSite
Hey WJ,
Without direct access to either the database/forum software or the webserver logs, the IP address from which reading/posting is performed (very much less an individual computer [personal or otherwise] <i>at</i> that address) is not discernible here. I don't doubt it's possible in this case to gain such access without it being granted by the owner/operators, but that would be illegal in a Federal way, even when just playing around and not being malicious. Mark's probably too smart for that.
Glen
Without direct access to either the database/forum software or the webserver logs, the IP address from which reading/posting is performed (very much less an individual computer [personal or otherwise] <i>at</i> that address) is not discernible here. I don't doubt it's possible in this case to gain such access without it being granted by the owner/operators, but that would be illegal in a Federal way, even when just playing around and not being malicious. Mark's probably too smart for that.
Glen
ehp
Addicted to ArboristSite
Like I said Eric if it is not you then I am wrong, so i would have to say I am sorry .
MEANHUSQVARNA
ArboristSite Member
Ed,
I'm sure you remember Mashsam cause thats the only show you've won in the last few years. Remember, you were using a Marcel saw - Paul Pfenninger's -. Talking about forgetting what about Eagle River and you sent a saw to Eagle River this year also and when Curt beat it you had a pile of excuses, you didn't have it finished. Why would you send a man that far with an unfinished saw?
We'll just leave it at this and time will tell the whole story on you.
I'm sure you remember Mashsam cause thats the only show you've won in the last few years. Remember, you were using a Marcel saw - Paul Pfenninger's -. Talking about forgetting what about Eagle River and you sent a saw to Eagle River this year also and when Curt beat it you had a pile of excuses, you didn't have it finished. Why would you send a man that far with an unfinished saw?
We'll just leave it at this and time will tell the whole story on you.
ehp
Addicted to ArboristSite
Glens you could be right but this post is starting toget more like the Art Martin thread everyday , nothing is said that has information in it just bashing which doesnot help anybody,
Yep Cecil got 3rd at Eagle River and is happier than hell with that,you have to walk before you can run, and he is still in the walking stage and as far as the saw not being finished he used it in the stihl series and did well with it in the big wood and that turned out to be one of his best points getting event , now a saw meant to cut 20 inch wood is not going to cut smaller wood as fast so that is why it has got a different jug and pipe on it now
Yep Cecil got 3rd at Eagle River and is happier than hell with that,you have to walk before you can run, and he is still in the walking stage and as far as the saw not being finished he used it in the stihl series and did well with it in the big wood and that turned out to be one of his best points getting event , now a saw meant to cut 20 inch wood is not going to cut smaller wood as fast so that is why it has got a different jug and pipe on it now
jokers
Addicted to ArboristSite
Hey guys,
This thread is turning into a witch hunt of sorts with the obvious intention of somehow breaking ehp down. I don`t profess to know any of the details first hand, but I know that this type thread is not welcome here. Think of the threads or posts which harrassed Art Martin.
I know that Ed, along with the likes of many others, is building some fast saws. The videos posted here are pretty good evidence of that.
There are always going to be rivalries and animosity between competitors so why don`t you guys accept that and not litter this place with petty back and forth bickering. I think that Ed is providing plausable explanations and answers to the scenarios that you have referenced MEANHUSQVARNA, why not back up what you infer if you have evidence to the contrary, then the chips will fall where they may. But then all that means is that Ed isn`t THE fastest sawbuilder or operator in existence, which by the way, I don`t recall ever hearing Ed say that he was.
Another thing MEANHUSQVARNA, without you revealing your true identity and accomplishments in the world of saw racing or building, what gives your statements any credibility? As an outsider to your presumed world, how do I know to trust your statements but not Ed`s?
Russ
This thread is turning into a witch hunt of sorts with the obvious intention of somehow breaking ehp down. I don`t profess to know any of the details first hand, but I know that this type thread is not welcome here. Think of the threads or posts which harrassed Art Martin.
I know that Ed, along with the likes of many others, is building some fast saws. The videos posted here are pretty good evidence of that.
There are always going to be rivalries and animosity between competitors so why don`t you guys accept that and not litter this place with petty back and forth bickering. I think that Ed is providing plausable explanations and answers to the scenarios that you have referenced MEANHUSQVARNA, why not back up what you infer if you have evidence to the contrary, then the chips will fall where they may. But then all that means is that Ed isn`t THE fastest sawbuilder or operator in existence, which by the way, I don`t recall ever hearing Ed say that he was.
Another thing MEANHUSQVARNA, without you revealing your true identity and accomplishments in the world of saw racing or building, what gives your statements any credibility? As an outsider to your presumed world, how do I know to trust your statements but not Ed`s?
Russ
ehp
Addicted to ArboristSite
Thanks Jokers, it is just the same Sh!t different day,
here is your answers to your statements
in Mashman did i run my old saw that i sold to Paul PF, yep
did I buy this saw from Marcel yep
is it the same as he sold to me NO,
what did i change, raised the transfer ports , raised the ext. port,
changed the head, which Marcel gave me the metal to do so,
shorten the header on the pipe, put a bigger gear on it because when i bought the saw it had a 11 tooth gear on it and if you went back and checked between Minden which was the first show i ran the saw and did nothing , my fastest time that day in 12 inch round was 5.5 seconds, and Sennetre which i ran 5.76 seconds in 14 inch round so something had to change now did in it. Did i win with 5.76 no, was third , Remi won with 5.69. Charles was 5.74,howdid i do the next time, 5.35, Remi was second 6.17 , in 14 inch round, maybe i cannot run a saw but the 3 times is was at Sennetre , 0-74 won 3 times,0-140 won twice and 3rd, open 16 inch wood ran twice got 2nd and 6th
now in Mashman that you say is the last time i won, in the 12 by 12 aspen yep i won and who was second , a regular stroke 3120 run by Woodland, 0-74 cc i was second with one of my slow 371's
three two go Charles won that , in the open using 14 by 14 square Woodland won with his rotax in 5.34 ,i cut 5.71 and got second with the 3120
You must be misinformed on my last show cause i ran in Bracebridge last year, won both mod classes there and went down east to Woodlands place, won 4 out of 5 classes there
so now you want to know why i would send a guy to Eagle River with a junk saw, well Cecil is a chopper and one of the better ones Canada has got, is he a chainsaw racer, nope but because he is at the shows he might as well try and because he is in the stihl series which he needs to learn how to run a saw because the points are so valuable so he got a 084 in July, ran it on gas until late Sept. put it on alcohol, ran twice, ParrySound and Fyreburg,then went to Eagle River, never started that saw until he got there, placed 3rd and happier than hell about it
enough about Cecil cause when he gets home next weekend I will let him tell you for himself, now can i run a saw, by the sounds of it by you NO, but i must be not to bad maybe not as good as you whoever you are, have i built the fastest saws , nope never said i did and never will but forsome reason my phone never stops ringing with guys wanting them and by the way who made the saw Cliff runs Marcel , and the saw he bought from Bill, Marcel,
so as the days of our life go by this is turning into a soap opera more and more all the time and i hate soaps so i think i will leave you to yourself and I will go on my way
here is your answers to your statements
in Mashman did i run my old saw that i sold to Paul PF, yep
did I buy this saw from Marcel yep
is it the same as he sold to me NO,
what did i change, raised the transfer ports , raised the ext. port,
changed the head, which Marcel gave me the metal to do so,
shorten the header on the pipe, put a bigger gear on it because when i bought the saw it had a 11 tooth gear on it and if you went back and checked between Minden which was the first show i ran the saw and did nothing , my fastest time that day in 12 inch round was 5.5 seconds, and Sennetre which i ran 5.76 seconds in 14 inch round so something had to change now did in it. Did i win with 5.76 no, was third , Remi won with 5.69. Charles was 5.74,howdid i do the next time, 5.35, Remi was second 6.17 , in 14 inch round, maybe i cannot run a saw but the 3 times is was at Sennetre , 0-74 won 3 times,0-140 won twice and 3rd, open 16 inch wood ran twice got 2nd and 6th
now in Mashman that you say is the last time i won, in the 12 by 12 aspen yep i won and who was second , a regular stroke 3120 run by Woodland, 0-74 cc i was second with one of my slow 371's
three two go Charles won that , in the open using 14 by 14 square Woodland won with his rotax in 5.34 ,i cut 5.71 and got second with the 3120
You must be misinformed on my last show cause i ran in Bracebridge last year, won both mod classes there and went down east to Woodlands place, won 4 out of 5 classes there
so now you want to know why i would send a guy to Eagle River with a junk saw, well Cecil is a chopper and one of the better ones Canada has got, is he a chainsaw racer, nope but because he is at the shows he might as well try and because he is in the stihl series which he needs to learn how to run a saw because the points are so valuable so he got a 084 in July, ran it on gas until late Sept. put it on alcohol, ran twice, ParrySound and Fyreburg,then went to Eagle River, never started that saw until he got there, placed 3rd and happier than hell about it
enough about Cecil cause when he gets home next weekend I will let him tell you for himself, now can i run a saw, by the sounds of it by you NO, but i must be not to bad maybe not as good as you whoever you are, have i built the fastest saws , nope never said i did and never will but forsome reason my phone never stops ringing with guys wanting them and by the way who made the saw Cliff runs Marcel , and the saw he bought from Bill, Marcel,
so as the days of our life go by this is turning into a soap opera more and more all the time and i hate soaps so i think i will leave you to yourself and I will go on my way
MEANHUSQVARNA
ArboristSite Member
Would it be wrong for us to set up a match?To have ehp to get the fastest 3 saws from canada!I will get the fastest 3 saws from the states.They will all cut on the same timber so the wood would be even.They will meet half way.These saws all have to be chainsaws with original jugs no bikes .Timber size will be 10in sqare.We will let ehp deside the purse.What ever he desides we will match.This match can happen any day of the week.Mounth when ever.My guys are ready.EHP this could be the biggest purse you ever raced for.Now you tell me is this fair.So lets stop all the name calling and get this race going.If you can think of a better way let the world know.We all like to race.We all like a chalange.ehp here is yours
MEANHUSQVARNA
ArboristSite Member
Would it be wrong for us to set up a match?To have ehp to get the fastest 3 saws from canada!I will get the fastest 3 saws from the states.They will all cut on the same timber so the wood would be even.They will meet half way.These saws all have to be chainsaws with original jugs no bikes .Timber size will be 10in sqare.We will let ehp deside the purse.What ever he desides we will match.This match can happen any day of the week.Mounth when ever.My guys are ready.EHP this could be the biggest purse you ever raced for.Now you tell me is this fair.So lets stop all the name calling and get this race going.If you can think of a better way let the world know.We all like to race.We all like a chalange.ehp here is yours
MEANHUSQVARNA
ArboristSite Member
These saws that you bring will be all ehp saws.Because you are the fastest. Our saws will all be biult by one person and will all come from mich.
ehp
Addicted to ArboristSite
First off Mean Husky you have not told us who you are but i know who you are, I never said i was the fastest nor the best , you did.
lets hear about the money , i like that stuff.
lets hear about the money , i like that stuff.
MEANHUSQVARNA
ArboristSite Member
are you in or out?This is real simple!!!!!!!
Husky372
ArboristSite Guru
rocky doesn't seem the type to need to use a fake name to get mean becuase half his post are anyway.
i am also curious who this mean husqvarna is. becuase he has only posted to bash ed who i dont know or ever talked to but seems like a decent enough guy from what i have read. so mean husqvarna come out of the dark and be a man unless your afraid to revail yourself if so i quess that says everything we need to know about you.
Last edited:
