How much horsepower? And Torque?

[Mange]

Don't take it so personal. I was just trying to offer some helpful info. Talk about not fair; Why don't you just cry over it. Get a life and quit being so miserable. Is that info not for the general public to refer to?

Yes, thats right. I forgot I was on a US forum, common courtesy is not that common.....


I rephrase my statement in that post:

Listen here children, when using other's knowledge and information it is a good thing to show appreciation and say you got it from them. There is no law or rule that say you must, but it is a good thing to do.

I go back to my own misreble every day life now so you can be left alone here and copy.

Hahaha

 

[Duncan13]

You should try OPTI-2 mix. It is a smokeless ashless oil that mixes like 70-1 we have been running it at our shop for about 6 years now and have noticed less fuel related problems. I have brought old saws in that have been sitting for two years with bad fuel in them put the Opti-2 mix in with Cheveron premium fuel and they ran fine. I have convinced many Pro cutters from the area like J.M Thomas wood products inc. to change over to it. It has an EGD+ rating meaning that it was mixed at 150:1 mix and ran for ten hours with no cylinder/piston wear. It creates a utectic process that reforms the flawed areas in the metals and smoothes them. As a matter of fact a customer brought in a FS 250 Stihl trimmer that he bought new from us 3 years ago used it once left the fuel in it and let it set till realizing that the fuel was bad. He brought it in before even trying to start the unit when he arived I took the unit and tryed to start it. It ran kind of rough so I put new fuel in it and tryed again ran rough again for a few second and then ran fine. Just try it I think you will be pleasently suprized. If you have trouble finding it e-mail me and I will get you some. Again I urge you to atleast try it.

same mine runs same compression, and I run amsoil saber 80:1 mix in it still smokes.
all ecept mine is an super. almost the same as yours kenskip.

 

[raybow1]

Yes, thats right. I forgot I was on a US forum, common courtesy is not that common.....

I go back to my own misreble every day life now so you can be left alone here and copy.

Hahaha

On the contrary; Most of the time common courtasy is why we try and help each other. We usually don't try and find a reason to bash another individual when they are simply offering something that is asked for. If you noticed I did mention the fact that I had found some useful info>just because I didn't mention where I got it doesn't mean I was trying to take credit for it. So rest assured I will not be moving in on your vast wealth of knowledge and taking over your commanding role in administering irrelivent remarks. So because I am courteous this is the last remark I will be posting to you. Have a good day and just becuase this is a US site has no bearing on my comment to you. God Bless.

 

[Mange]

I think it is only fair to give credit when copying information. This is from Chainsaw Collectors Corner, no doubt.
Post a link instead, it is more fair.

I did not know this was bashing, if so, I am sorry, I will keep my thoughts to myself from now on.

 

[spacemule]

On the contrary; Most of the time common courtasy is why we try and help each other. We usually don't try and find a reason to bash another individual when they are simply offering something that is asked for. If you noticed I did mention the fact that I had found some useful info>just because I didn't mention where I got it doesn't mean I was trying to take credit for it. So rest assured I will not be moving in on your vast wealth of knowledge and taking over your commanding role in administering irrelivent remarks. So because I am courteous this is the last remark I will be posting to you. Have a good day and just becuase this is a US site has no bearing on my comment to you. God Bless.

Actually raybow1, Mange is correct, and I don't think he was being so hard on you. He was letting you know that what you were doing is taboo--a way of helping you out. Using uncited sources is called plagiarism, or intellectual theft. Yes, we appreciate your help, but providing a source for information not from yourself is common decency, and in some cases law. You seem to be the one taking Mange's comments personally, not the other way around. Also, keep in mind that Mange's first language is not English.

 

[Stihl 041 super]

weak

I've been looking at some of the 041 posts and the reason why the 041 av
44mm is so weak is that look at what that 61ccm engine is breathing out of.
also the super has the same exhaust. I bet you could get 5.5 hp or more
If you built a pipe like a dirtbikes pipe to make it breathe alot better. My 041 super has so much pressure coming out of those slits that I can use it at half throttle to blow a sidewalk full of leaves clean.

 

[Chris J.]

Let's not forget that the info on CSCC is copyrighted . While Mike Acres probably won't freak over it, it is courteous to acknowledge the original source of the information. Mike & his crew put a lot work into CSCC, & they deserve to receive the credit. Fair is fair.

 

[Al Smith]

I will vouch for the amount of time involved.I don't have a website,but spend literaly days scanning IPLs and sending to a few that do.I was only one of many that did this,Mange and Lewis Brander are among others that did also.

 

[Lawn Masters]

we all appreciate being given some credit for our hard work and time. Even if its just something small, we still deserve some credit.