cheeves
Tree Freak
- Joined
- Aug 8, 2010
- Messages
- 14,732
- Reaction score
- 84,744
- Location
- Plymouth, Mass. America's Hometown
And it also looks more red than orange.
Husky 365 special real or china ?
- Thread starter Applehead
- Start date
Help Support Arborist Forum:
And it also looks more red than orange.
AUSSIE1
Al.
- Joined
- Aug 25, 2006
- Messages
- 8,004
- Reaction score
- 1,979
Yeah bit of a bugger when you fork out for the ridgy didge.
Ok, look forward and to get a little more enjoyment out of it, whack on a ported BB kit.
Ok, look forward and to get a little more enjoyment out of it, whack on a ported BB kit.
deye223
Addicted to ArboristSite
just looked at this haven't been through all the thread yet but it's fake the sprocket nose has a lube hole haha still bars don't have em
tommyus4
ArboristSite Operative
That sucks.
View attachment 230275 Same mini pad, .....err air filter as in the other charlie chan thread. Notice the made in Sweden stamp inside the cover.
View attachment 230276 Looks like a legit Husky plug. :msp_rolleyes:
View attachment 230277 Comp at 145 out of the box cold.
View attachment 230278 Came with the highly sought after and elusive ANABA carb.
View attachment 230276 Looks like a legit Husky plug. :msp_rolleyes:
View attachment 230277 Comp at 145 out of the box cold.
View attachment 230278 Came with the highly sought after and elusive ANABA carb.
Last edited:
- Joined
- Nov 9, 2005
- Messages
- 1,539
- Reaction score
- 1,818
ANABA carb, I knew she's one of the judges on DWS, didn't know she got her start making carbs, diversification is a smart move. 
Got the recoil rewound n back on , really cheesy casting and plastics...I don't think these materials will hold up to much stress.View attachment 230279
Put some fuel in her and to my surprise she fired up pretty easy, 3 pulls and go. One pull once warm.
View attachment 230280
Nice new B & C , Ja ?
View attachment 230281
Put some fuel in her and to my surprise she fired up pretty easy, 3 pulls and go. One pull once warm.
View attachment 230280
Nice new B & C , Ja ?
View attachment 230281
View attachment 230282 F'n STIHL chain ???? :msp_wub: Maybe its not all bad. j/k :jester:
MCW
Somebody's talking crap here & it ain't the tree!
Be very very careful trying to get any revs out of it with those Anaba carbs. They WILL lean out and you'll seize it.
As no doubt you have already found it will have come tuned extremely rich - if you want it to survive change the carb or leave it rich. I also wouldn't be surprised if it's only 65cc and not 72cc.
Before you run it too much fork out for a genuine Walbro as I bet if you run a tacho over it it's only pulling around 11,000rpm. If you try to get it to a Husky type RPM you'll pay for it big time.
The carb confirmed it's Chinese like we already knew.
The Chinese also knock off a lot of bars and tend to use the Oregon Power Match Plus pattern a lot on their solid bars. They also use the Oregon code - You'll probably find D009 on the bar code.
Don't give up on it though as if you change the carb you'll probably find it will do OK. I had a starter rope pull out of a new MS660 so it can happen to the best of them
That's because it's a copy
As no doubt you have already found it will have come tuned extremely rich - if you want it to survive change the carb or leave it rich. I also wouldn't be surprised if it's only 65cc and not 72cc.
Before you run it too much fork out for a genuine Walbro as I bet if you run a tacho over it it's only pulling around 11,000rpm. If you try to get it to a Husky type RPM you'll pay for it big time.
The carb confirmed it's Chinese like we already knew.
The Chinese also knock off a lot of bars and tend to use the Oregon Power Match Plus pattern a lot on their solid bars. They also use the Oregon code - You'll probably find D009 on the bar code.
Don't give up on it though as if you change the carb you'll probably find it will do OK. I had a starter rope pull out of a new MS660 so it can happen to the best of them
That's because it's a copy
Last edited:
little possum
Crash and Burn
Make me a good deal, and Ill run it. Its just a chainsaw. Yes you spent some change on it. But its got good aftermarket coverage
spike60
Addicted to ArboristSite
The rope will keep breaking because the cheap metal starter pulley, (it's supposed to be plastic), has a sharp edge that cuts the rope off at the knot.
spike60
Addicted to ArboristSite
And you deserved every bit of it "mate", because you're playing both sides of the fence here, and it's BS. You're trying to hand us this nonsense about the "good" chinese knockoffs, (yours), and the "bad" knockoffs, (everybody elses). Who do you think your kidding with this crap? It's a fine line, and somewhat silly for you to make such a big deal about which decals end up on the saws, as though there is an acceptable level of deceit; as if only a half hearted attempt to mislead the buyer is OK. You have a "MAJOR" problem with these saws if the level of misrepresentation exceeds a lower level of same that you are comfortable with. Yeah, right. You're part of the problem dude.
Be very very careful trying to get any revs out of it with those Anaba carbs. They WILL lean out and you'll seize it.
As no doubt you have already found it will have come tuned extremely rich - if you want it to survive change the carb or leave it rich. I also wouldn't be surprised if it's only 65cc and not 72cc.
Before you run it too much fork out for a genuine Walbro as I bet if you run a tacho over it it's only pulling around 11,000rpm. If you try to get it to a Husky type RPM you'll pay for it big time.
The carb confirmed it's Chinese like we already knew.
The Chinese also knock off a lot of bars and tend to use the Oregon Power Match Plus pattern a lot on their solid bars. They also use the Oregon code - You'll probably find D009 on the bar code.
Don't give up on it though as if you change the carb you'll probably find it will do OK. I had a starter rope pull out of a new MS660 so it can happen to the best of them
That's because it's a copy
Thanks for the info. If I go this route , the Walbro is preferable to the Zama ???
huntindog1
ArboristSite Operative
Spike60, I saw you shopping in Walmart the other day, you guys are funny.
spike60
Addicted to ArboristSite
I never go to walmart. Seriously.
deye223
Addicted to ArboristSite
HAHAHAHAHAHAHA :haha:
