Husky 395 High Volume Oil

[diver64]

I'm not happy with the amount of oil the stock oiler is putting out for the 36in bar using a .063. Is there a high volume for this saw and could someone point me at one?

 

[RedneckChainsawRepair]

You sure you got your oiler adjusted right? Pic below.

Even my clone oiled 36" great buried in hardwoods.

 

[HumBurner]

I'm not happy with the amount of oil the stock oiler is putting out for the 36in bar using a .063. Is there a high volume for this saw and could someone point me at one?

Should have no problem oiling up to 4-5' bar.

390 oils a 42" well enough.

 

[diver64]

Yes, Ive got it turned all the way up. I tried it in both directions just to be sure.

 

[Squareground3691]

The 395 , is one of the best oilers out there , something isn’t right then , have you run the saw without bar to see oiler work ? open up the oil hole in the bar twice as big , I always open them up ,

 

[Gord404]

sometimes the oiler hose filter looses its brass screen due to wear and will suck garbage up into your pump