ccicora
Addicted to ArboristSite
Three Huskies for sale 345, 350, 345CC
I have three Husky saws for sale here they are:
The guy who has the 345 and 350 is a friend of mine who was given a 351 and a 55. He would like to sell these two saws:
345 new came out of the box then was put back in. Has not even filled up or run. The original owner bought another saw and would like to sell this one. ($215 plus shipping)
350 Has two cuts on it in an 8x8 cant of Poplar. Used for a baseline for some testing. The cleaned and put away. ($265 plus shipping)
This is one of my personal saws.
345CC Woodsaw. This saw is a new woods saw that I have built. The saw has had the following done and compared to KDhotsaws spects. And Yes You can check with Ken on this one.
Both intake and exhaust ports done
All ports chaffered
Intake boot redone
carb worked on
Piston done
Muffler is a duel port stock appearing muffler.
EPA regulators removed
Compression increased
Now has a Rim sprocket drive
Here is the test results:
before modification- 16+ sec cut on 12 inch wood (completely stock 3.0 hp)
After completion (345CC) 7.6 sec same wood!
My stock 026 Pro was 12.3 sec. Thats has 3.5 hp
After using MacDizzy's Cals. I approximate the new Hp to be around 4.0-4.3 depending on which way you calculate it. Either way there was a 50% gain in cutting speed. If you are interested in this saw please contact me.
Thanks,
Chris Cicora
[email protected]
I have three Husky saws for sale here they are:
The guy who has the 345 and 350 is a friend of mine who was given a 351 and a 55. He would like to sell these two saws:
345 new came out of the box then was put back in. Has not even filled up or run. The original owner bought another saw and would like to sell this one. ($215 plus shipping)
350 Has two cuts on it in an 8x8 cant of Poplar. Used for a baseline for some testing. The cleaned and put away. ($265 plus shipping)
This is one of my personal saws.
345CC Woodsaw. This saw is a new woods saw that I have built. The saw has had the following done and compared to KDhotsaws spects. And Yes You can check with Ken on this one.
Both intake and exhaust ports done
All ports chaffered
Intake boot redone
carb worked on
Piston done
Muffler is a duel port stock appearing muffler.
EPA regulators removed
Compression increased
Now has a Rim sprocket drive
Here is the test results:
before modification- 16+ sec cut on 12 inch wood (completely stock 3.0 hp)
After completion (345CC) 7.6 sec same wood!
My stock 026 Pro was 12.3 sec. Thats has 3.5 hp
After using MacDizzy's Cals. I approximate the new Hp to be around 4.0-4.3 depending on which way you calculate it. Either way there was a 50% gain in cutting speed. If you are interested in this saw please contact me.
Thanks,
Chris Cicora
[email protected]
Last edited:
