Chainsaws and Lifelong Friends Raffle

[Mastermind Worksaws]

What's up Cuz? always a good day when you wake up above ground.

Same old stuff here. Spent the last week getting my first cutting up. I'm a tired old guy.

Hope all is well in your neck of the woods.

 

[GCJenks204]

Two weeks remaining until draw date!!!

 

[GCJenks204]

Less than one week to get in on this. More than 60 prizes to select from.

 

[NeSurfcaster]

Can we use paypal or only credit cards? Also for multiple chances, would I do multiple 10 dollar donations or could I pay say 30 bucks at once for 3 chances? I looked for a paypal section on the link but no luck.
There is some really sweet prizes, I'd be happy with at least half of the prizes.

 

[Drptrch]

Ding Ding !!


Erik

 

[SeMoTony]

Can we use paypal or only credit cards? Also for multiple chances, would I do multiple 10 dollar donations or could I pay say 30 bucks at once for 3 chances? I looked for a paypal section on the link but no luck.
There is some really sweet prizes, I'd be happy with at least half of the prizes.

Over 62 prizes so $310 to have thirty one chances. To B honest one prize per person in spite of which I think a person or two or more have made donation in an amount to allow their name to be pulled sixty times in a row. First one is only one which counts.
$10,600 at last check

 

[GCJenks204]

Can we use paypal or only credit cards? Also for multiple chances, would I do multiple 10 dollar donations or could I pay say 30 bucks at once for 3 chances? I looked for a paypal section on the link but no luck.
There is some really sweet prizes, I'd be happy with at least half of the prizes.

Sadly GFM doesn't accept PayPal unless you have a PayPal debit card. Yes, you can donate one sums ie $100 for 10 chances you don't need to purchase them $10 at a time.

 

[NeSurfcaster]

Thanks for the info.

 

[joe kool]

i got to be in it to win it, so i am

 

[NeSurfcaster]

I'm in it, hoping to pick up that pro mac 700 or a 2 series husky

 

[Mastermind Worksaws]

Remember fellers. If you win that MS461.......you gotta contact me so we can talk about how you want it ported. Normally......I up the compression and open the muffler a lot. Some guys may find that too hard to start.....and obnoxiously loud.

 

[cuinrearview]

too hard to start.....and obnoxiously loud.

Huh? Whassat mean? In English please.

 

[Mastermind Worksaws]

Huh? Whassat mean? In English please.

 

[Philbert]

Remember fellers. If you win that MS461.......you gotta contact me so we can talk about how you want it ported.

Will be in touch. Thanks!

Philbert

 

[SeMoTony]

Remember fellers. If you win that MS461.......you gotta contact me so we can talk about how you want it ported. Normally......I up the compression and open the muffler a lot. Some guys may find that too hard to start.....and obnoxiously loud.

If the winner of the 461 needs practice before getting the saw I will let you practice by starting my ported 661 with a comp release which almost reduces the resistance. It may seem too loud at first but after a few tanks it loozes volume or at least seems to. Right Randy?
$10660 a moment ago

 

[Mastermind Worksaws]

If the winner of the 461 needs practice before getting the saw I will let you practice by starting my ported 661 with a comp release which almost reduces the resistance. It may seem too loud at first but after a few tanks it loozes volume or at least seems to. Right Randy?
$10660 a moment ago

Remember, a 395xp decomp really helps.

 

[SeMoTony]

Remember, a 395xp decomp really helps.

Naw! It only reduces the sport for an old fart like me!
Stay safe out there

 

[GCJenks204]

Another prize donated to the list.

Draw Date is tomorrow...


1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @TRoller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo 3/8 x .058 20" bar with chain and extra .404 rim. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. Husqvarna 2100cd Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. ***NO LONGER AVAILABLE***Drill Doctor 750X drill bit sharpener. Donated by @USMC615 THIS WAS BEING SHOWN SOME BROTHERLY LOVE BY JASON'S BROTHER AND APPARENTLY HE PUT THE WRONG THING IN THE HOLE OR SOMETHING AND IT GOT BROKEN.

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @TRoller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @TRoller (pick up only)

34. 47 rounds of hard nose 357. Donated by @TRoller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69

49. Survivor Homelite Super 2, the original owner is an older gentleman who cannot use the saw anymore. Put away running years ago probably just needs cleaning to have a runner here. Includes case and owners manual. Saw has strong compression and should be a fun vintage to add to a collection! Donated by @malk315

50. Three loops of 28" .404 .063 Carlton Chain. Donated by @Deets066

51. I’d like to offer 50 of my exhaust deflectors. Donated by @XP_Slinger (more details post #641)http://************/attachments/b2247b34-fdb1-41fd-a601-7a013d7a363c-jpeg.120588/

52. A personally crafted belt axe/knife combo.....stay tuned. Donated by @Scotty Overkill

53. I have a new Golf Piston for a Husqvarna 41 That I will donate. Donated by @tomdcoker

54. It will be one .5 Gallon (2L) Extra Virgin Olive Oil and Mediterranean and Greek Delicacies (Dry Goods)-- including shipping. Donated by @AlfA01

55. It will be one .5 Gallon (2L) Extra Virgin Olive Oil and Mediterranean and Greek Delicacies (Dry Goods)--including shipping. Donated by @AlfA01

56. 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166 is being re-gifted by @BonScott46

57. Stanley Carpenter's Axe donated by @ajschainsaws

58. 20” Archer Pro Plus bar. It was on a 6100 for 3 test cuts. 3/8, .050, 72 dl (I believe Small Mount K095) Donated by @Dahmer

59. A 562 that I rebuilt for myself a couple summers ago- New bearings, seals, fuel tank, piston + ring + cylinder, air filter, muffler, and assorted smalls. It's a good, smooth runner. It's an all numbers matching unit from 2012 and runs flawlessly. The last software update it got was in early 2014. Donated by @Jacob J.

60. A Berger pruning saw with sheath. Donated by @PissRev

61. A new Opamma PET-1100R tach, incl shipping from New Zealand. Donated by @KiwiBro

62. A 23pcs. set of HAM Präzision Super Drills,The set I would like to donate will consist of the following diameters in millimeters: 2.4 / 3.3 / 3.5 / 4.0 / 4.2 / 4.5 / 5.0 / 5.2 / 5.5 / 6.0 / 6.5 / 6.7 / 7.0 / 7.5 / 8.0 / 8.5 / 9.0 / 9.5 / 10.0 / 10.5 / 11.0 / 11.5 / 12.0. https://www.ham-tools.com/index.php?id=641&L=1
Donated by @wilhelm

63. Timberline sharpener to the raffle. It looks very lightly used/ almost new condition. Comes with one 7/32 bit. Donated by @Mastermind

 

[GCJenks204]

Lots of GFM action the last 24 hours. Jon has to work today so likely won't get the drawing done until some time this evening.

If you wish a member over at O P E has put on the prizes in to downloadable format, choices of .doc , .ods, .odt or .xls . You can download one or all and use it to manipulate your list for prize selection.

Thanks Wilhelm

https://we.tl/xSiVG4K5vj

 

[GCJenks204]

Winners names will be announced at 8:00pm EDT tonight.