Sold Husqvarna 3120XP $875 SOLD

[procarbine2k1]

Real clean Husqvarna 3120XP. Selling this saw for a buddy, which he received as a trade in for another saw. I know the previous owner (another friend), and I have spent a little time cutting with this saw, this one is a beauty! If I needed another big saw, I would be keeping this one for myself- you couldn't ask for a saw to be much cleaner than this one. Save a ton of money over new, for a clean used one in great looking and great running condition. Send me a PM, not interested in trades at this time.
If anyone is interested, the carb can be drilled for H side adjustment for a small charge. I don't look for this saw to be around here long. Check out the serial number, 0070007 - here is you chance James Bond fans....

 

[bryanr2]

Dear Lord you are killin me man!

 

[mdavlee]

Dear Lord you are killin me man!

Make a nice milling saw.

 

[bryanr2]

that's what Im thinking about.

 

[William Balaska]

Gives me wood just looking at her. Any bar or chain or pho? How's the clutch cover no shot of it?

 

[bryanr2]

is that a newer one or older? at some point I read something regarding these that indicated one era was favored over the other (bc of a better carb) but cant recall it at this time.

 

[bryanr2]

if its clean on the recoil side and the front of the case- it's probably pretty sharp on the clutch side too.

 

[William Balaska]

Limited carb means limited coil I believe

 

[procarbine2k1]

Gives me wood just looking at her. Any bar or chain or pho? How's the clutch cover no shot of it?

PHO, added clutch cover pic in. Should be first pic in the thread

 

[procarbine2k1]

if its clean on the recoil side and the front of the case- it's probably pretty sharp on the clutch side too.

It is a beauty, I know he took good care of it and didn't use it much. Just too big of a saw for around these parts. A good running 066 or 395 would take care of anything standing up around here. I have another friend getting rid of a 880, just because he rarely uses it, and he operates a tree service. Just about ever one of my saws 6 cubes and down get a 16-20" bar.

 

[agrams]

sunuva. Im in the market for a 395xp, but that thing is tempting me...

 

[procarbine2k1]

One thing about it, if a person were to use this saw and take care of it... I don't believe you are going to loose anything in a few years when you need to resell it. These big saws hold their money pretty well, I think a person could probably flip this on the Bay and make a couple bucks. The way they have been charging fees it probably wouldn't be worth the effort. I stopped selling on there about a year ago, and solely use AS and another wood forum I am on and have had great results.

 

[procarbine2k1]

You guys are slacking, I figured this would have been sold by now

 

[Hinerman]

Not slacking,,,,,lacking,,,,as in lacking funds

 

[luckydad]

Man this saw sure looks nice !! Got any compression readings ??


Sent from my iPhone using Tapatalk

 

[Guido Salvage]

Try to pull it over, that will tell you what you want to know.

 

[bryanr2]

Dam somebody got a deal. Cant tell you how many times I have looked at this thing tonight (i really wanted it) but what I "need" and have approval on from Kari is a wheeled trimmer for some areas I cant get my wide area mower to. Ive picked out the BearCat 190T after extensive research the last couple of days. Had settled on a DR previously but just happened to stumble on a Bear Cat's video online.

 

[LowVolt]

Wow. So who is the new owner? Luckydad???

 

[bryanr2]

Wow. So who is the new owner? Luckydad???

Id like to know myself- for future use.opcorn: I like keeping up with the "saws I shoulda bought"

 

[agrams]

I'm the lucky guy with the dent in the bank account. I was hunting for a 395xp, but couldn't pass this up for a milling saw. I even talked to the wife about it before I bit the bullet. She even said it sounded like the better choice... hah. God bless that woman.