tntblaster14
ArboristSite Operative
I would REALLY prefer a local pickup as I have a lot of complete builder/parts saws, and a lot of loose parts (new cylinders, pistons too for these models). I live in 21042 Maryland, but can travel if someone is serious within reason. I have to move in the very near future, and will not need all these saws, nor have the space to store them.
Husqvarna 346xp ported $350 , 359 ported $350,, 395xp $500, 372xp w full wrap handle $400. You'll notice the 395 has JB Weld on the fuel handle, I have a replacement that can go with it for $25. It doesn't leak, and hasn't for years.
Saws were professionally ported and run fantastic. Tuned to 32:1 fuel. Regular saws are 50:1. Saws all come w /a bar/chain if you want. I have lots of extra new bars and chain too. Not to mention those complete rolls of chain, unopened. The Chain I'd like $100/roll. (LGX, 100R, and that 25' roll of .325)
The saws were ported by a member on this site, with a little digging I could probably come up with the name. (Elect6845 is in my old messages for a 359, thats all I could find, I did buy a few saws from him) But they are all great runners.
As for the builders/parts I have
346 x 7
372 x 1
395 x 1 (heated handles, but need repair)
266 x 2 (one ran about 3 years ago, but I can't get it started now easily)
Stihl 028 WB/Supers x 8
As stated above, I have lots of parts, cyclinders, pistons, fasteners, plastics, crankcases, bearings, carb kits, carbs, etc for all these models.
If someone wanted everything, running saws, parts, chain rolls, the whole shebang, $4000 (more or less). I can get you more pics if needed. Limit to post is 10.
Husqvarna 346xp ported $350 , 359 ported $350,, 395xp $500, 372xp w full wrap handle $400. You'll notice the 395 has JB Weld on the fuel handle, I have a replacement that can go with it for $25. It doesn't leak, and hasn't for years.
Saws were professionally ported and run fantastic. Tuned to 32:1 fuel. Regular saws are 50:1. Saws all come w /a bar/chain if you want. I have lots of extra new bars and chain too. Not to mention those complete rolls of chain, unopened. The Chain I'd like $100/roll. (LGX, 100R, and that 25' roll of .325)
The saws were ported by a member on this site, with a little digging I could probably come up with the name. (Elect6845 is in my old messages for a 359, thats all I could find, I did buy a few saws from him) But they are all great runners.
As for the builders/parts I have
346 x 7
372 x 1
395 x 1 (heated handles, but need repair)
266 x 2 (one ran about 3 years ago, but I can't get it started now easily)
Stihl 028 WB/Supers x 8
As stated above, I have lots of parts, cyclinders, pistons, fasteners, plastics, crankcases, bearings, carb kits, carbs, etc for all these models.
If someone wanted everything, running saws, parts, chain rolls, the whole shebang, $4000 (more or less). I can get you more pics if needed. Limit to post is 10.
Attachments
-
108136507_10159072750894528_6850893791014905326_n.jpg -
108179899_10159072751259528_6425970114550967052_n.jpg -
108521063_10159072750734528_689121900310606010_n.jpg -
108857842_10159072751389528_1910654619276440853_n.jpg -
109006169_10159072751324528_6074726741363268784_n.jpg -
109067388_10159072751159528_1858761105679639184_n.jpg -
109417251_10159072750674528_6682468876178694524_n.jpg -
109471911_10159072750844528_4435929104375573545_n.jpg -
109514224_10159072750419528_7623142064941580702_n.jpg -
109539833_10159072751519528_506833677325763390_n.jpg
