Husqvarna 42 - Pups old 42

[shanman355]

Hey there. My grandfather passed away I I got what I asked for his old 42. It’s not much but special. We worked on the Xmas trees snigging for him behind the old 42 and he made us work. It ran but not good so I tore it down. I think I need a cylinder and piston but I can’t find one . I’d rather have stock than cheap aftermarket unless there is a great quality company that is making parts reliable for work. Local dealer came up with nothing for me. I got some pictures. I hope someone can help. It means a lot to me the old saw. Thanks because the ole girl means a lot to me

 

[J D]

Can you get a better pic of the exhaust side of inside the cylinder...
Looks to me like that would clean up ok & then drop a meteor piston in it (assuming they're available)

 

[HumBurner]

I have a 42 that is not in use after the tank-handle leaked, ignited, and melted. The saw didn't feel or respond like it had any issues. I bought it used and put at least 30 tanks through it brushing and bucking rounds.

I'd sell it to you, but shipping might be a bear. Top end should be good.

 

[shanman355]

Can you get a better pic of the exhaust side of inside the cylinder...
Looks to me like that would clean up ok & then drop a meteor piston in it (assuming they're available)

I’ll try. My uncle always done his 254s himself so he’s gonna look at it later. Thank you

 

[shanman355]

I have a 42 that is not in use after the tank-handle leaked, ignited, and melted. The saw didn't feel or respond like it had any issues. I bought it used and put at least 30 tanks through it brushing and bucking rounds.

I'd sell it to you, but shipping might be a bear. Top end should be good.

Where are you? If it’s good I’m ok with shipping if it’s not outa this world

 

[shanman355]

Can you get a better pic of the exhaust side of inside the cylinder...
Looks to me like that would clean up ok & then drop a meteor piston in it (assuming they're available)

I will yes

 

[shanman355]

Ca

I have a 42 that is not in use after the tank-handle leaked, ignited, and melted. The saw didn't feel or respond like it had any issues. I bought it used and put at least 30 tanks through it brushing and bucking rounds.

I'd sell it to you, but shipping might be a bear. Top end should be good.

n I delete another thread I started?

 

[J D]

Can I delete another thread I started?

You need to ask a moderator to delete or merge the threads.
@pioneerguy600 may be able to help

 

[pioneerguy600]

You need to ask a moderator to delete or merge the threads.
@pioneerguy600 may be able to help

I can lock the thread but can no longer delete a thread once other members have replied to it.

 

[shanman355]

Can you get a better pic of the exhaust side of inside the cylinder...
Looks to me like that would clean up ok & then drop a meteor piston in it (assuming they're available)

Busy day. I’m gonna try for a picture later

 

[shanman355]

Your in

Ca

n I delete another thread I started?

Cali?

 

[shanman355]

Can you get a better pic of the exhaust side of inside the cylinder...
Looks to me like that would clean up ok & then drop a meteor piston in it (assuming they're available)

Here you are

 

[shanman355]

Here you are

 

[pioneerguy600]

I would give that cylinder a good go at cleaning it up, I have cleaned up much worse many times. There are video`s using flap wheels that make the cleanup much faster but even hand sanding will take a bit longer but give good results.