Husqvarna Case Splitter

[Cantdog]

Anyone have a pic of the husky splitter in action. ?? I'm not getting the mental picture of how it's gonna get around the case.

Tanks in advance.

Sure.........splitting cases....then pushing crank out of remaining case half etc. etc.

 

[Cantdog]

Sorry I don't have any of finger placement but in this pic that shows the crank that was just pulled...When getting the splitter fingers into the case you must rotate the crank so the crankpin is at TDC with counter weights down then the fingers locate against the bearing or case depending on size of saw/bearings, the screw centers on the crank end, turn the handle....apart it comes..

 

[angelo c]

Sorry I don't have any of finger placement but in this pic that shows the crank that was just pulled...When getting the splitter fingers into the case you must rotate the crank so the crankpin is at TDC with counter weights down then the fingers locate against the bearing or case depending on size of saw/bearings, the screw centers on the crank end, turn the handle....apart it comes..

Thanks Cantdoggie, nice work wasn't getting the pic in my mind. Now I got it.