husqvarna duckbill valve replacement

[millbilly]

I posted this question under husqvarna 24 but heading was wrong.

I was replacing a fuel line and grabbed the duckbill check valve with my hemostats and pulled it out of its socket in the tank. I now have to remove the brass plug on the outside of the tank to reinstall the the check valve.

My question is how do you remove this plug?

I pressurised the tank hoping to blow it out but that didn't work

 

[Kostas]

I posted this question under husqvarna 24 but heading was wrong.

I was replacing a fuel line and grabbed the duckbill check valve with my hemostats and pulled it out of its socket in the tank. I now have to remove the brass plug on the outside of the tank to reinstall the the check valve.

My question is how do you remove this plug?

I pressurised the tank hoping to blow it out but that didn't work

Take a screw and screw it in the plug.Then you just pull out the screw and the plug will come out as well.

 

[millbilly]

Take a screw and screw it in the plug.Then you just pull out the screw and the plug will come out as well.[/Q

How do i screw into steel?

 

[Roanoker494]

Take a screw and screw it in the plug.Then you just pull out the screw and the plug will come out as well.[/Q

How do i screw into steel?

Any metal screw will thread right into it, a coarse wood screw does a good job.

 

[Bbaughman2008]

How do you replace the brass plug after using a wood screw to remove it. Wont it leak

 

[RED-85-Z51]

How do you replace the brass plug after using a wood screw to remove it. Wont it leak

If its like a frost plug they arent generally reusable

Sent from my LM-G820 using Tapatalk

 

[Bbaughman2008]

If its like a frost plug they arent generally reusable

Sent from my LM-G820 using Tapatalk

Can these be ordered online

 

[RED-85-Z51]

Whats your model number

Sent from my LM-G820 using Tapatalk

 

[Bbaughman2008]

Whats your model number

Sent from my LM-G820 using Tapatalk

240

 

[RED-85-Z51]

240

Not really a plug..it looks like a porous vent/filter

Sent from my LM-G820 using Tapatalk