I need some Homelite EZ help

[vegaome]

Howdy Folks,

I went and bought a Homelite EZ off of ebay. Well my luck finally ran out, was bound to happen sooner or later. I pulled the muffler off and it did not have a gasket, came off easy too (1st bad feeling in gut). Rotated crank and saw broken ring (2nd bad feeling in gut). Put muffler back on and went to se my Mom. She got to come home from the hospital today! Bad feeling in guts went away seeing her walk around the yard again.

I could use a parts manual and a good source for parts.

Any help would be appreciated.

v/r

Mike

 

[RaisedByWolves]

Grab your UT# and head over here.....





http://www.arboristsite.com/showthread.php?p=717335#post717335




SUX when you get a deal like that, but you cant win them all.....




.

 

[wood rat]

Just use some tube gasket .
This should do it for you.

As for the rest good luck .

 

[vegaome]

Howdy RBW,

I take it a UT is a model number on the saw somewhere? I will go find both of them, I have two EZ's.

Did you want me to post it on your woodruff key thread? Very funny by the way I missed that one somehow.

v/r

Mike

 

[ray benson]

Post the UT numbers here, someone will have them.

 

[vegaome]

Howdy Folks,

Broke Blue Homelite EZ: Type 10100 S/N 92690292

Running Red Homelite EZ: Model EZ S/N 33181335

The Red one's tage does not list "Type" it only says EZ.

The Blue one looks like it need just about every rubber gromet around the air clener area as they are either missing or split. One of the rings is broken off right near the muffler so maybe it did not get eaten? I can see no damage on the cylonder but have not torn it down yet. Saw also does rotate and seems to have some compression. Reluctant to run or cycle it because might dislodge a broken peice of ring. I may get by with just rings, there looked to be two of them.

I like these old homelites and Macs.

v/r

Mike

Sorry Fella's I'm out of bullets for you.

 

[RaisedByWolves]

OK, so this is not an "S"EZ then, its the similar, but older EZ, but not the original.


Correct?



If thats right, I have a cylinder for it, but I dont have the rings.:help:

They may be hard to come by as they SEZ replaced that one right about the time they became popular.



Lemmie find a link to some info.....


.

 

[RaisedByWolves]

OK, Im figuring its not this one.....


http://www.acresinternet.com/cscc.n...eb3ca85a9be9c21588256b0500209a8b?OpenDocument



But that you have found this.......


http://www.acresinternet.com/cscc.n...2fa40898f3cfe83a88256c28006a3269?OpenDocument



and the EZ auto?........



http://www.acresinternet.com/cscc.n...a646a89ddaee8f1c88256c2600186a9d?OpenDocument



The major differences being the Auto has a lil more displacement and of course an auto oiler.


Their both nice saws and the blue homies in good shape bring a premimum price.



.

 

[Lakeside53]

OK, Im figuring its not this one.....


Their both nice saws and the blue homies in good shape bring a premimum price.



.

$50, instead of $35...

 

[vegaome]

Howdy Folks,

It is the smaller plain EZs that I have. One is blue and one is red. RBW the middle link you provided from acres site. Neither say automatic on them.

http://www.acresinternet.com/cscc.n...2fa40898f3cfe83a88256c28006a3269?OpenDocument

v/r

Mike