johnsered 111S

[sawpsycho]

Gentleman

I am looking for information crank-seal size and bearings for rebuilding this 111s which is an australian saw . This is probably a 1980 saw so if any body can shed some kerf on the saw much apprechiated.Can seem to saw no the big saws . I think it is 111cc's

sawpsycho

 

[ccicora]

This will give some information for you. Its just nice to look over.

http://www.acresinternet.com/cscc.n...d53e69636a2a952288256b69007c7361?OpenDocument

 

[ray benson]

One of the members - John in MA has a Jonsered 111s.He may be able to help.But has not posted in awhile. http://www.arboristsite.com/member.php?u=1611
Should be able to send him an email.
Ray

 

[LJS]

sawpsycho, your from Redcliffe, Queensland eh! Do you happen to know Kerry Head and family? LJS

 

[John in MA]

At least in the US the seals and bearings were still dealer-supplied parts a little while ago. Lacking that, a good power transmission (belts, bearings, hoses, etc) store can cross-reference them. I believe they're standard parts.

It's a 110cc Swedish saw, probably late '70s.

 

[Lawn Masters]

Look here, this is similar to the 111S model, its just a little different. same basic saw.
http://www.acresinternet.com/cscc.n...d53e69636a2a952288256b69007c7361?OpenDocument

 

[Mange]

If you need parts or advice ask "motorsag".
He has the parts and knollege you need.
It is his saw on disply at the link O.S.A posted.

http://arboristsite.com/member.php?u=1239

 

[Mange]

All Jonsereds that is made before 1975 is (with wery few exeptions) made here in Sweden.