Sold Jonsered 2166 R4 Yes It's For Sale

[chipper1]

I've still yet to run an XPW, but I have read they're dogs out of the box relatively speaking. Maybe this is due to them being a concrete saw jug? I don't know, but I have a new cylinder in a box on the shelf so I'll find out one of these days.

Next time you stop by you can run mine if you'd like, it's all stock right now, but when I swap everything over to the 365 special chassis it will get a MM and base gasket delete.
Cutting this ash is the closest thing we get to cut that's like concrete lol.

 

[U&A]

I was born in southern Cal.

Right, those things don't work.

Southern California eh...?

Man..... it is all making sense now....[emoji848]






[emoji23][emoji23][emoji23]
Sorry, had to Brett[emoji16]


Sent while firmly grasping my redline lubed RAM [emoji231]

 

[chipper1]

Southern California eh...?

Man..... it is all making sense now....[emoji848]






[emoji23][emoji23][emoji23]
Sorry, had to Brett[emoji16]


Sent while firmly grasping my redline lubed RAM [emoji231]

It's all good .

 

[chipper1]

I also have total/tsumara reduced weight bars in 24x.050 and an EXL chain I can add to the box for another 100.

I think brett heats his house 100% black locust cookies[emoji1787][emoji1787][emoji1787]


Sent while firmly grasping my redline lubed RAM [emoji231]

Somehow I just saw this post.
No, I use a lot of ash, cherry, oak, and even some elm and maple cookies to heat the house too .
Sometimes when I'm real desperate I'll use a few splits .

 

[Just_A_Grunt_1978]

so were there any saws for actual sale in this thread, or did I miss it????

 

[chipper1]

so were there any saws for actual sale in this thread, or did I miss it????

There's always saws for sale, first couple post were specific to this particular ad, as well as a couple others.
Thanks for looking/ asking,
Brett

 

[stihlaficionado]

Next time you stop by you can run mine if you'd like, it's all stock right now, but when I swap everything over to the 365 special chassis it will get a MM and base gasket delete.
Cutting this ash is the closest thing we get to cut that's like concrete lol.

Is that one of the purdy ones with hardly any blemishes that barely gets used?

 

[chipper1]

Is that one of the purdy ones with hardly any blemishes that barely gets used?

It is, and it will be even purdier once it's all swapped out .

 

[Deleted member 117362]

Is that one of the purdy ones with hardly any blemishes that barely gets used?

All of his saws are!

 

[Country bumpkin]

Here you go guys.
View attachment 786231 View attachment 786232 View attachment 786233 View attachment 786234 View attachment 786235

Looks good Brett!!

 

[chipper1]

Looks good Brett!!

Thanks James.

All of his saws are!

Couple got dirty today lol.

 

[stihlaficionado]

All of his saws are!

nah...some have a few nicks here & there & that's ok

The 359 I bought a few years ago went on to get Delerized & now is doing firewood duty for another member
& the 193T I bought 4 years or so ago has been trouble free.

Both not purdy but in overall good condition

The 2166R I bought in December was purdy however

 

[chipper1]

nah...some have a few nicks here & there & that's ok

The 359 I bought a few years ago went on to get Delerized & now is doing firewood duty for another member
& the 193T I bought 4 years or so ago has been trouble free.

Both not purdy but in overall good condition

The 2166R I bought in December was purdy however

Now wait a minute, that 193t was pretty dang clean. I'd image its still very clean.
But I'm glad they are all working well for you .

 

[Deleted member 117362]

Thanks James.

Couple got dirty today lol.

One saw does not count, it's a Stihl, they always look like crap after one use. Jonsered, I think you just stuck it in snow, it will melt off. Is that your neighbors tree he cut down?

 

[stihlaficionado]

Now wait a minute, that 193t was pretty dang clean. I'd image its still very clean.
But I'm glad they are all working well for you .

Not perfect condition, but nice

here is a pic of 359 I bought years ago

Replaced the clutch cover & that's about all that was done cosmetically(maybe the muffler was painted). But since I wasn't going to run the saw
what was done to improve its performance was more important.

The point of my original post was that Brett has many different saws for sale: From the pristine to the rough. He clearly states any imperfections that
he can find.

 

[chipper1]

Not perfect condition, but niceView attachment 790513

here is a pic of 359 I bought years agoView attachment 790514

Replaced the clutch cover & that's about all that was done cosmetically(maybe the muffler was painted). But since I wasn't going to run the saw
what was done to improve its performance was more important.

The point of my original post was that Brett has many different saws for sale: From the pristine to the rough. He clearly states any imperfections that
he can find.

Thanks Mark I know I don't like surprises unless its something that looks better than expected. Hope you put a 455/460 clutch cover on there, its a nice upgrade.

One saw does not count, it's a Stihl, they always look like crap after one use. Jonsered, I think you just stuck it in snow, it will melt off. Is that your neighbors tree he cut down?

Lol.
I do need to drop some for the guy I share a drive with, been waiting for the ground to freeze up. Their nothing to big so I'll probably be able to use a saw you built . May get the 372xt you built out with a 20, would be a nice combo. May need the 241 though gotta check for sure, the one is half rotten and I need room to set the hinge with a bore cut, then still have room for a trigger. Can do it with a wider bar, but when its finished it looks like a modified farmers cut .

 

[cuinrearview]

Can I put a 36" bar on this on my Alaskan mill?

 

[chipper1]

Can I put a 36" bar on this on my Alaskan mill?

Absolutely, you might want to buy a pair of them though .
Personally I'd strongly consider the 661 .

 

[PA Dan]

Absolutely, you might want to buy a pair of them though [emoji23].
Personally I'd strongly consider the 661 .

Of course you would...

 

[cuinrearview]

Would this be a good saw for @fl cracker ?