Jonsered Chainsaws

[Kensie1988]

Yeah, looks longer than 32". You want to be careful not to overload the saw with too much B&C....good way to smoke your motor in a hurry if/when you stall the bar in a cut......lots of torque going on there.

Those flocked filters and A/F covers were perpetually on eBay for yr & yrs....maybe they're all gone now.

Kevin

I'll definitely play around with it and see, if it's too much I'll drop it down, my buddy across the road has a Bridgeport mill, so if I have to make a 10mm mount I can with relative ease.

Sent from my E6810 using Tapatalk

 

[Kensie1988]

So I just measured it, it's 35" and if you subtract the spikes it's only 33" of cutting length lol

Sent from my E6810 using Tapatalk

 

[Kensie1988]

Yes this angle does make that bar look huuuge

Sent from my E6810 using Tapatalk

 

[Real1shepherd]

Interested in the filter set-up also

This the wing you speak of:

Sent from my iPhone using Tapatalk

Yes. but that's only part of it....it has oversized screws (length) that were made for it too.

The thing about the copper mesh filter is that it's a poor filter....you'll fill you crankcase bearings with sawdust.....with that wonder screen. Like I said the flocked filters were on eBay forever....but expensive. I think it was mostly the same seller...I'd wait until he dropped the price $5 and then buy a few......we played that game for yrs.

Kevin

 

[Kensie1988]

Is it the ones that are $55 right now lol

Yes. but that's only part of it....it has oversized screws (length) that were made for it too.

The thing about the copper mesh filter is that it's a poor filter....you'll fill you crankcase bearings with sawdust.....with that wonder screen. Like I said the flocked filters were on eBay forever....but expensive. I think it was mostly the same seller...I'd wait until he dropped the price $5 and then buy a few......we played that game for yrs.

Kevin

Sent from my E6810 using Tapatalk

 

[Real1shepherd]

So I just measured it, it's 35" and if you subtract the spikes it's only 33" of cutting length lol

Sent from my E6810 using Tapatalk

I'm going by what they ran on the 910 here, which has slightly more cc's/rpm....they ran a 36" 3/8 bar in the woods. I have no idea what chain....don't remember. I think you'd be fine on the 80 with 32" 3/8" bar and full-comp chisel. That may be close to what they ran in the woods on the 910.....chain-wise style.

Kevin

 

[Kensie1988]

Well this bar did come off my 920 lol I may get a 32" Tsumara and mill it to 10mm from 9.5mm

Sent from my E6810 using Tapatalk

 

[Real1shepherd]

I don’t know how true the Tsumara bar slots are, but try it first before milling. I had quite a few large mount Husky bars that fit right up on 10mm J’reds.

Niko tried to tell me that’s not possible, but I assured him it happened. You’re only talking about a small difference in mass produced bars.


Kevin

 

[Kensie1988]

I don’t know how true the Tsumara bar slots are, but try it first before milling. I had quite a few large mount Husky bars that fit right up on 10mm J’reds.

Kevin

Yeah I will test it first for sure, .5mm is probably within most manufacturers tolerances

Sent from my E6810 using Tapatalk

 

[Drptrch]

Yes. but that's only part of it....it has oversized screws (length) that were made for it too.

The thing about the copper mesh filter is that it's a poor filter....you'll fill you crankcase bearings with sawdust.....with that wonder screen. Like I said the flocked filters were on eBay forever....but expensive. I think it was mostly the same seller...I'd wait until he dropped the price $5 and then buy a few......we played that game for yrs.

Kevin

Thx Kevin. I have that on mine. Just making sure that’s what you were referring to, I’ll check out the filter.
Does the flat bottom circle AF cover work or different one needed ?


Sent from my iPhone using Tapatalk

 

[Drptrch]

Would one of you have an IPL for the 80
Or is this the one
https://app.box.com/s/h7hi7frvbx26dtnnf32zilohb3b3o48g


Sent from my iPhone using Tapatalk

 

[Drptrch]

Is it the ones that are $55 right now lol

Sent from my E6810 using Tapatalk

Yep. Ya want to share it like step-kids : ))


Sent from my iPhone using Tapatalk

 

[Drptrch]

This is mine, came with the original 22” roller tip bar also

Is that little tube protrusion for a wrap or a chain catcher perhaps

Sent from my iPhone using Tapatalk

 

[Kensie1988]

This is mine, came with the original 22” roller tip bar also

Is that little tube protrusion for a wrap or a chain catcher perhaps

Sent from my iPhone using Tapatalk

I see yours has the same hole mine got when I ripped the pipe out trying to pull the spark arrestor screen

Sent from my E6810 using Tapatalk

 

[taplinhill]

So I just measured it, it's 35" and if you subtract the spikes it's only 33" of cutting length lol

Sent from my E6810 using Tapatalk

Spikes? I thought that was a kickstand................

 

[ray benson]

OK Tim...here tis. Back in the 80's a Jonny dealer copied the IPL for me on the 80 he had.....so that's the one copy. And the other is right out of the 80 SM with translated English. The one page is all they show for the oiler. You'll need Adobe to see the files. Let me know if ya need anything else.

Kevin

Copied the ipl and sent to @Drptrch

 

[Real1shepherd]

Err......even the SM just shows that sucky copper A/F and the flat bottom cover. My old 80 IPL does not show the flocked filter or the round cover.

You will need the round cover for the flocked filter....it's longer, the filter. And the round A/F cover will have a screw in it with a keeper. Make sure if you find the round cover it has the screw with keeper or you'll never find those by themselves.

I have a couple of flocked filters I've abandoned because some of the flocking has come off. I searched for info all over the Net on the process for flocking nylon mesh A/F's......found next to nothing. It can't be that hard, except it has to be gas/oil worthy....the adhesive stuff.

Kevin

 

[Real1shepherd]

Would one of you have an IPL for the 80
Or is this the one
https://app.box.com/s/h7hi7frvbx26dtnnf32zilohb3b3o48g


Sent from my iPhone using Tapatalk

That looks like the flocked filter and it's certainly the round A/F and part #. It would be impossible to illustrate a flocked filter, so I'm sure the one pictured is supposed to be flocked. Besides, the flat bottom A/F cover will not work with the flocked filter.

I think those are all the correct #'s for the flocked filter and the round A/F cover. Now you guys just have to find them....lol.

The round cover is recessed conical so the screw can reach in and catch. I don't think I've ever seen a round, nylon mesh A/F for J'reds that wasn't originally flocked.

Kevin

 

[Real1shepherd]

Spikes? I thought that was a kickstand................

Big bark dawgs fer sure....lol!

Kevin

 

[Kensie1988]

I like them big dawgs lol As long as they look cool like those, I dont like the big ones with like 6 or 8 prongs, 3-5 is my sweet spot